Flat Mop vs String Mop

Choosing the right mop for the right task can be a bit challenging for some individuals. There is no doubt that mopping is an old-age cleaning technique used in cleaning your floor, and it remains to be one of the commonly practiced methods when it comes to keeping your floor clean.

There are different mop types used in cleaning different surfaces, with the two common ones being flat mop and string mop. Choosing between the two can be confusing at times; therefore, we shall be focusing on flat mop vs string mop in this article.

  • Quick Picks

In a hurry? Pick a mop from our top recommendations!

With a built-in wringer for hands-free drying of the mop head: O-Cedar Easy Wring Mop

 Super absorbent with the capability for quick drying:  Tidy Tools String Mop

With a 280 degrees swivel head for varied cleaning angles to reach tough spots: Tethys Flat Floor Mop

What is a flat mop?

flat mop reviews

If you are new to mops, then you might be wondering what a flat mop is. Well, a flat mop is a long pad that is designed for cleaning your floor, and it does not require a bucket of water and a solution.

When cleaning using a flat mop, you will be relying on static electricity, which will attract dust and dirt to the mop, making it easy to clean your floor without water or a solution.

Moreover, flat mops are designed from different materials, with the most common being the disposable and reusable microfiber.

When looking for the best flat mop, we strongly recommend that you invest in one that is designed from microfiber since they tend to clean your surface to perfection.

When using a flat mop in cleaning your floor, you will be able to get rid of up to 99.9% of germs and bacteria with or without using any chemical to disinfect your floor.


What You Need to Know About Using a Flat Mop


1. Flat mops feature several benefits, with one being that they can be paired with an on-board chemical solution. This tends to eliminate the need for a bucket.

The on-board chemical dispenser is counter mounted at the handle of your mop, and it holds the solution. Once you pull on the trigger, this particular unit will end up dispensing chemicals directly to your floor.

2. Furthermore, this system has been designed to help workers to perform the cleaning process more quickly and with great accuracy.

In addition to that, it helps in reducing the risk of cross-contamination by getting rid of the need to dip your mop in a bucket with a dirty solution. This reduces the chances of water chemicals spilling from your bucket.

3. A flat mop helps in improving cleaning capability thanks to the microfiber material used in making its pads. The microfiber features an incredible structure designed to trap water and dirt compared to other mops, which keeps the dirt trapped in them.

A flat mop is unique from other cleaning mops that drug dirty water and dirt around your floor as you clean. Once the dirt gets in the mop, they get locked until you wash the mop properly.

4. In addition to that, flat mop endorses a green environment. There are several cleaning solutions that tend to create huge environmental issues due to harsh chemicals and toxic fumes.

When using flat mops designed from microfiber, it helps you minimize the need for such a cleaning solution, especially when you consider that various mopping systems tend not to require chemicals.

5. The best part of using a flat microfiber mop is that it eases the cleaning process significantly. When cleaning large surfaces, you will require an efficient mop, and one which is efficient to use and flat mop fits all these requirements.

Even if you have your flat mop soaked in water completely, they tend to be very light in weight, making the cleaning process less tiresome and easier without putting lots of physical demands since most mops tend to require lots of strength when it comes to using it and rinsing.


Despite being a great product, flat mops also have their flaws. One of the significant drawbacks of using a flat mop is that it is relatively challenging to wring out as you clean the mop cloth.


What is a string mop?

string mop reviews

On the other hand, a string mop is a traditional type of mop which are often available in several facilities. String mops are usually manually operated and are ideal when it comes to cleaning some of the finished floors like a tile floor.

Several string mops are made from cotton, with others being designed from rayon material in the form of yarns and then attached to the mop’s head. They are often used manually since they require hands when wringing water and drying the floor.

Unlike their counterpart, string mops tend to have excellent absorbency and incredible scrubbing power. When using this particular mop, accessing some of the hard to reach areas becomes much more comfortable.


What You Need to Know about Using a String Mop


1. String mops are often designed from an affordable cotton material, which makes them pocket-friendly.

2. In addition to that, string mops are equipped with incredible scrubbing power and excellent absorbency, making the cleaning process relatively easy. These mops make getting into corners a breeze.

3. Since they feature incredible absorbency and excellent scrubbing power, string mops are best for use in areas that experience high traffic as well as soiled surfaces.

The heavyweight of the cotton fiber offers a heavy mop along with the ability to use additional agitation. You can rinse the mop in a bucket once it gets soiled.


As you mop using a string mop, you will either be using a double or single bucket system. Both of these systems cost your extra pocket.

When using the single bucket system, there an available pail for both clean and dirty water. Therefore, when dipping your mop back to the bucket, your solution ends up becoming soiled.

Each time you use the mop on your floor and bring it back to the bucket to rinse, your solution continues to become more contaminated.

Furthermore, dirty water is unavoidably being brought back to the floor as the mopping procedure continues. The only way you can avoid this by changing your solution constantly, and in most situations, this is not a feasible idea due to labor, time, and resource restriction.

On the other hand, the double bucket method is a relatively better mopping technique since the cleaning, along with the rinsing containers, are different buckets but on the same mop cart.


Which one should I choose: flat mop vs string mop?

flat mop vs string mop for cleaning floors

When it comes to choosing between a flat mop vs string mop, the mop will often depend on the task you will be carrying. However, some of the critical things that will help you to choose between these two mops include;

Which one is tougher on microbes and germs?

Flat mops are designed from microfiber, a synthetic material that blends, making it relatively easy to trap and hold on to dust, bacteria, and dirt within the fiber.

On the other hand, string mops tend to push dirt along with other debris around rather than picking them up.

Furthermore, since cotton is an organic material, it can be the perfect place to harbor bacteria and odors. Therefore, when it comes to choosing the best mop, which is tough on germs and microbes, we strongly advise choosing a flat mop.

Which of these mops is eco-friendly?

With a rise in global temperature, it is high time that we all start curbing our carbon footprints. When it comes to mops, flat mops are said to be eco-friendly since they require less amount of water along with cleaning products during the cleaning process.

Using a small amount of solution is very important since most professional cleaning products contain harmful chemicals washed down the drain. These chemicals get absorbed into our air, water, and soil.

Which is the most expensive mop?

When it comes to prices, flat mops tend to be expensive compared to their counterpart string mops.

Usually, flat mops will cost approximately three times more than a string mop. Despite being a bit pricey, flat mops are long-lasting, and they are capable of standing up to frequent washing.

Which is the best mop for cleaning a large surface area?

Flat mops are capable of holding up to six times their weight in water, unlike the regular string mop. Therefore, this means that a single mop head is capable of going approximately 400 to 500 square feet per time prior to being stored for washing.

A regular string mop, on the other hand, will go approximately 100 square feet before you dunk it back into your solution and start wringing out.

Which is the easiest mop to use?

When it comes to an easy-to-use mop, it will be determined by few characteristics such as easy in wringing out, easy to maneuver, relatively easy to set up, carrying around as well as the ability to clean large and smaller surfaces.

The primary consideration you should consider making is if there is a large, greasy spill that requires cleaning in the industry.

In such a case, a flat mop will not be the best option since they feature relatively small fibers. This means that the string mop with a cotton head will be the best option, it is very effective, and it will make the cleaning process relatively easy.

When it comes to other jobs, string mops will require wringing once they become fully soaked in solution and water. This will end up putting a high amount of stains on your body while working.

In addition to that, string mops with cotton heads tend to be 80% heavier when compared to a flat microfiber mop. Furthermore, flat mops don’t have the ability to connect to a water source directly.

Which one is the easiest to clean and dry for reuse?

Both flat mop and string mop can be laundered easily once you are done using them.

  • Nonetheless, a flat mop can withstand the repetitive laundering process way better than a string mop, which tends to take a toll in every wash.
  • A string mop heads will start to shred and knot easily during the cleaning process; this adds to their shorter life span, unlike their counterpart flat mop.



1. Are string mops sanitary?

They remain to be very effective mops, especially when working on heavy-duty cleanings such as industrial work or outdoor moping jobs.

String mops are often designed from highly durable cotton fiber, which is excellent for cleaning up commercial floors and decks. Furthermore, they have excellent absorbency, but they tend to leave a streak, which makes them less pleasant for use in indoor jobs.

String mops come equipped with a wring bucket, which essential when it comes to getting rid of excess water before you start moping the floor.

A string mop with a large mop head tends to be pretty much heavy; however, it will absorb more water. As a result, you will require a strong bucket for wringing your string mop.

2. When to use a flat mop or string mop?

When it comes to maintaining a hard-surface floor, you will have to use a high-quality mop. Maintaining a hard-surface floor can be done with either a string mop or a flat mop.

The two mops are both capable and effective; however, each mop has a specific purpose.


Final Recommendations

How to Wax Linoleum Floors?

You need a tough flooring to make sure it holds up. One way to keep those tough floors looking good is to wax them from time to time. Learning how to wax linoleum floors is just one responsibility every homeowner needs to master.

By keeping the linoleum in top shape you are making sure your household expenses are reduced. The less money you spend on replacing linoleum, the more you have for other activities like a nice night out with your mate.


How to Wax Linoleum Floors?

how to wax linoleum floors

The steps are simple to follow and if done correctly, your linoleum floor should withstand a lot of heavy traffic over the years. Just follow these steps in order to achieve good results:

Step 1: Remove all furniture and other contents standing on the floor, like bikes, trunks, clothing, bags, etc. from the room.

Step 2:Next, clean the floor with an approved cleaner that won’t hurt the linoleum. A ph neutral cleaner is okay, just make sure to follow all instructions on the bottle. Let the floor dry thoroughly

Step 3:Now pour the liquid wax into a bucket that has a wringer attachment. Dip your clean, dry linoleum mop about halfway into the wax and then wring out the excess.

Step 4:As you spread the wax, dip the mop into the bucket as often as needed. Use a smooth figure 8 pattern and move the mop from side to side. It is okay to overlap each section as you go

Step 5:When you are done, let the floor dry and that takes about 20 minutes to an hour depending on atmospheric conditions. Remember not to mop yourself into a corner

Step 6:Once dry, add another coat or two in order to fully protect your floor. Following the previous 3 steps for each coat.

Step 7:When those coats are finished and dry, you are done. Clean your mop, bucket, and any rags you used.


How to Strip-Off Old Wax?

Sometimes cleaning and re-waxing a linoleum floor is not enough. You need to know how to properly strip off the old wax in order to keep your floor from building up too much wax.

Here are the instructions to strip off the old before you put the new wax on:

  1. Use wax strippers made for linoleum floors. Any other kind will damage your floor and cost you money for repairs
  2. Mix the stripper in warm water, then apply with a dry, clean mop
  3. Working in 3 to 4-foot sections, let the stripper soak in for a few minutes. Any area larger than that may have the stripper drying on you and make you do it all over again
  4. Once the soaking is done, scrub those little areas with a good brush
  5. Then rinse off with clean. Clearwater using another dry, clean mop
  6. Do a second rinse with clear water and let the floor dry thoroughly. The floor should look dull when you are done


Some Tips and Warnings for Waxing Linoleum Floors

wax linoleum floors

Even though the task of stripping and waxing sounds easy, there are some tricks of the trade as well as issues you should avoid. Here are some of those tips and warnings you should be aware of:

1. Do not use strippers on new linoleum

2. Never dilute wax with water. It is sold ready to use

3. It is better to use three or four thin coats than one or two thick coats. The latter may be easier but your floor will not look so good

4. Do not put too many coats on your linoleum floors. Three is the maximum and if you want a fourth coat, read the instructions on the wax can to see if that is allowed

5. Never use a fan to speed up the wax drying time. You can spread dirt and dust over your hard work ruining your effort

6. Some linoleum floors and waxes have a self-leveling capability. Drying the floor too quickly will interfere with that ability.

7. Using cleaners with too much or too little ph ingredients can harm the look of the waxed floor

8. The best cleaner to use is a ph neutral one. That preserves the look of your floor making it something to be proud of


FAQs about Wax Linoleum Floors

clean linoleum floors

1. How do I keep my waxed floors clean between waxings?

Use a soft bristle broom several times a week or a vacuum cleaner without the bristle bar. The bristle bar can harm your wax finish.

2. How often do I need to wax my linoleum floor?

Depending on if it is high traffic or low traffic floor, basically, you should wax it every 2 to 6 months.

3. Can I use the wax paste instead of liquid wax on my floor?

You can but the wax paste does not leave the same quality of shine that liquid waxes do.

4. Is it okay to use a buffer to make the floor shine better?

Yes, it is but make sure the buffer is designed to work on linoleum flooring. The buffer should not weigh too much either.

5. Why do I need to remove the old wax before applying a new coat?

You do not have to do this every time you wax. You can wait until you have applied a few coats of wax before stripping it all off. The old coats get dull after a while and dirt gets stuck in the older coatings.

6. How do I protect my newly waxed floor?

The best way to protect your new wax is to put floor cushions on the legs of the furniture you have in the room and keep sharp heavy objects on mats or rugs.


Some Final Words

As you can see, waxing and stripping your linoleum floor is not that difficult. The hardest part is the time it will take to get both jobs done. But if you follow the instructions on the cans carefully, your chore will be a success and your linoleum will be protected for a few more months.