How to Clean A Smelly Mop?

The smell of dirty mops can be overwhelming, and they’re a breeding ground for germs, especially in schools. Unfortunately, mops are often overlooked when it comes to cleaning routines, but you should know how to clean a smelly mop at least once every week.

The smell of a fresh, clean mop can make your whole day. But what if that fresh-smelling mop starts to stink? Luckily there are some easy ways to get rid of the stench and allow you to enjoy mopping again.

 

Why Does Your Mop Smell Bad?

why your mop smells bad

Why does your mop smell bad?

The answer may seem simple, but the underlying cause can be as complex.

Mold and mildew will grow on a wet surface if it sits long enough, even after you’ve mopped!

Therefore, it’s essential to dry out any wet floors immediately with paper towels or old rags before leaving them for too long so that they don’t become infected by these odorous bacteria.

This is especially true during humid summer months!

In addition, the moist environments in your home can cause mold and mildew to grow on the mop, causing an unpleasant musty smell.

Last but not least, after cleaning the dog urine with a mop, remember to wash your mop. Otherwise, the smell of dog pee will linger on your mop for a long time and smells bad.

 

Best Ways to Get the Odor out of Mops?

If you’re feeling frustrated about the lingering odor of your mop, don’t worry; there are plenty of ways to get it out.

First thing first, if your mop head is detachable and washable, you can simply throw it into a washing machine. If you don’t prefer this method or your mop head is fixed, washing it with cleaners is another method you can choose.

You can use baking soda and vinegar mixed in a spray bottle with water for an all-natural solution, or try pouring boiling water over the head before wringing it tightly so that any leftover liquid can dry up faster.

  1. Use warm water. Fill your washing bucket with warm water and prepare a bottle of bleach, vinegar, or baking soda.
  2. Put the mop into the bucket while rotating the mop quickly and hit the bottom of the bucket to completely remove the germs.
  3. Drain the dirty water and get a bucket of clean water. Spray bleach and vinegar on the mop.
  4. Refill the bucket with hot water, and soak your mop with baking soda.
  5. Leave the mop in the bucket for 30 minutes, and then repeat the steps above.
  6. Wring out the mop and rinse it in a clean mop one more time.
  7. Put your mop under the sun to dry it.

 

How to Deep Clean and Sanitize Your Mop after Using?

After mopping the floor and removing all traces of dirt from your home, you should deep clean your mop.

Then, soak it in a bucket with some bleach for at least an hour to kill any bacteria that may have been left behind after use.

Make sure not to get water on the aluminum part, resulting in corrosion over time!

Rinse well until no more detergent can be seen coming out of the bristles or head when squeezed hard by hand; air dry before storing away, so they don’t end up smelling musty later down the line due to moisture condensation forming inside during storage.

After mopping your floor, you should deep clean and sanitize the mop before putting it away to avoid any unfavorable microbes from lingering next time.

You can use a 1-quart warm water solution mixed with two tablespoons of bleach or a designated cleaning agent for this purpose.

 

How to Prevent the Odor of Your Mop?

how to keep your mop clean

Using a smelly mop to clean the floor only makes the floor smells too. Therefore the smart choice is to prevent your mop from getting stinks.

First, make sure your mop is completely dry. Every time you use mops, do not just leave the damp mop in the bathroom. Put it in an open area to let it dry naturally.

Second, clean it thoroughly after using it. If the mop is not cleaned thoroughly, it will get a smell because of dust and detergent remains. Traces of dirt will spread grime during the next use, and leftover soap residue can damage your mop.

Third, store the mop in a cool place, A dry place is an ideal storage place for cleaning tools. After mopping floors, you can hang it,  so the mop head avoids brushing against the floor.

Fourth, replace the mop head regularly. Cleaning a new mop pad regular is necessary because a dirty and smelly mop can not work well on floors. Make sure a replacement every two or three months when the mop is getting dirty and hard to clean.

 

Conclusion

You will be able to clean your mop with this article, and you can avoid the need for a new one. To get rid of that smell when cleaning your mop, it is crucial to do so regularly.

This way, any bacteria or other germs in the flooring where you are mopping won’t have time to linger before they are removed by water and soap solution.

If you don’t want to invest in buying another plastic handle, there are many ways we show how you can proceed with just what you currently own!


 

How to Remove Stains from Vinyl Flooring?

Vinyl is a popular material used in flooring, both private and commercial living spaces. Vinyl flooring comes in diverse designs and is easy to maintain.

For it to maintain its quality and shiny appearance, it needs proper cleaning and regular maintenance. Vinyl flooring is resistant to many bases, alcohols, acids as well as oils.

There are different types of stains common in vinyl tile, and each will dictate the remover and method you will use to remove it.

 

Best Ways of Removing Stains From Vinyl Flooring

remove stains from vinyl floors

Vinyl floor staining is hardly permanent. The stains occur when a potent chemical substance is left on a floor for a long duration.

Always wipe out any liquid or dirt that spills on the vinyl floor as soon as possible, as they might result in tough stains that can prove hard to remove.

Some of the common stains that can get in your vinyl floor and the different ways to remove them are as follows:

  • Rust Stains

Rust stain on the vinyl floor is not removable with the regular cleaning of the flooring. The most effective remedy of removing rust stain is a paste of water and oxalic acid power. The oxalic acid powder is commonly known as wood bleach. The following are steps to follow.

  1. First, prepare the paste by mixing water with the oxalic acid powder.
  2. Put on the gloves and rub the paste on the rust stain on your vinyl floor using a damp cloth.
  3. Once you are done rinse the area with clean water
  • Scuff and Heel Marks

Vinyl flooring can be damaged by scuff and heel marks, as it is the case in other flooring surfaces. Scuffs patches appear on the top of the surface. When you use the ingredients that safely remove these marks, you leave the vinyl floor looking new.

  1. Use a pencil eraser to scrub off the scuffs
  2. You then moisten the eraser with water and use it to remove the remaining scuff or marks
  3. Dampen a soft cloth with rubbing alcohol to remove the remaining residues
  4. Rinse the vinyl with a clean damp cloth and then dry it off
  • Yellowing

Yellowing of the vinyl floor is very common, especially when the floor is aging making it look worn or dirty. It is mainly common if the rubber mat is used because the yellowing is due to continual contact with rubber. The below steps are a guide on how you can remove these stains.

  1. Sweep or vacuum the floor to make it sparkling clean
  2. Use a soft damp cloth and wet the yellowed area
  3. Sprinkle baking soda on the yellowed area and let it sit on the surface for about 15 minutes
  4. Use a wet cloth to rinse the stain
  5. Repeat the process until the stain is completely removed
  • Chewing Gum

Chewing gum is an ordinary stain that affects different types of flooring. The following is a simple procedure on how to remove it from your vinyl floor.

  1.  Put crushed ice in a bag and place it above the stain. Then leave it there for several minutes to brittle the chewing gum
  2. Use a plastic knife that is non-abrasive to the vinyl floor to pry the gum
  3. Remove the chewing gum residue by soaking a soft cloth on rubbing alcohol and rub it off
  4. Then rinse the floor area that had the stain
  • Wax

For the candle lovers, candle wax spills are an ordinary stain that they experience on their vinyl floor. For you to remove, follow the following procedure:

  1. Wait until the candle wax is completely dry
  2. Use a non-abrasive scraper, i.e., a plastic knife or a rubber scraper, to extract the wax from the floor
  3. After removing the wax, wipe the vinyl with a damp microfiber cloth soaked on a vinegar-water solution
  • Grease Stains

These stains are very stubborn on the vinyl floor, but there is still a remedy for removing them.

  1. First, place some ice on the grease stain and let it sit there for about 15 minutes
  2. The grease stain hardens and is easily removed using a plastic spoon or knife
  3. After removing the stain, wipe off the remaining grease residue using a window cleaner. You then rinse off the area
  • Nail Polish

If you accidentally spill nail polish on your vinyl floor, there is no need to worry. Using the below steps, you will remove the stain without leaving any traces.

  1. Soak a soft cloth on rubbing alcohol or on an acetone-free nail polish remover
  2. Apply on the stain and leave it for a few minutes
  3. Rinse off the surface
  • Other Stubborn Stains

Other stains are occasioned by spills from tomato sauce, red wine, grape juice, and other related stains. The remedy of removing them is:

  1. Dilute bleach and water in the ratio of 1:4
  2. Soak a soft cloth on the solution and lay it over the stain and leave it to sit there for about one hour
  3. After the stain vanishes, rinse the surface with a clean damp cloth and then dry the area

 

Things to Avoid When Removing A Stain On Vinyl Flooring

vinyl floor remove tough stain

  • Do not scrub too hard

cleaning the vinyl floor with too much force can damage the vinyl floor and make it lose its shine. Use a soft material to rub gently

  • Never use abrasive cleaners

abrasive cleaners contain chemicals that are harmful to the vinyl floor

  • Do not soak and leave the floor wet 

Vinyl flooring seeps water via the edges into the seams, destroying the glue that attaches the floor, and thus reducing the floor’s strength

  • Wax polish or solvent-based

It is advisable not to use wax polish or solvent-based on vinyl floors because it damages the floor and takes its shine

  • Ammonia or ammonia-based solution

These ingredients break down the material causing cracks on the vinyl floor

 

Conclusion

Spills stains and scuffs are inevitable in your vinyl floor, but the way you handle them determines if your vinyl floor will be damaged. Whenever you notice a stain on your vinyl floor, use the proper stain removal technique or choose the right mop for vinyl floors as illustrated above for fast and effective results.

 

How to Repair Laminate Flooring?

Can laminate floors be repaired? Well, this is a common question that most homeowners ask considering this type of floor is quite delicate. The laminate floors are similar to wooden floors and are quite fragile as well. The laminate floors are designed with wood grain features and planks of the same sizes as the wood.

Although these floors are delicate, most homeowners still prefer them because they are attractive and easy to maintain since they don’t need much maintenance services. The floors are also durable as long as you follow the right measures, especially in cleaning and the best part is that; the floors are repairable in case of damage.

 

How to Repair Water Damaged Laminate Floors

repair water damaged laminate floor

If the laminate floor has water damage, here are the steps to follow to repair it:

  • Mark the Water Damaged Area

The first step to take is checking the area(s) where the floor is damaged and determines the source. The water may be from a leaking roof, wall, or even a plumbing issue if the damage is near a water plumbing section.

It is crucial to determine the source of the water damage to repair it first to prevent future damages.

How do you do this?

Check the extent of the damage.

Once you identify the source of the water damage and solve it, the next crucial step is to figure out the extent of the damage. The laminate floors are like wood, and when they get saturated by water, the materials absorb water and break the structure. This mainly happens if the water stays stagnated for too long before wiping.

The next step is to mark all the areas that are water damaged to prepare for repair and to guide you in finding out the perfect materials to utilize for repair.

 

  • Remove the Damaged Floors

Laminates are like tiles, and you cannot repair a small section of the damaged area. Therefore, if the water has extended to two or three planks, then you will need to remove all of them for repair.

Remove the damaged laminate floor parts using a sharp tool for safety and to save time. Make sure to remove a plank at a time. Once you have eliminated the top laminate floors, check the base layer to see if the water has extended to the base. If the water has spread to the base floor, then you may need to remove it but if it is still safe, leave it.

 

  • Buy New Laminate Planks

Once you remove the damaged laminate planks and basement, the next step is to get new ones for replacement.

You should consider buying from the same dealer as it is much easier to get the right size and model.

If you opt for another dealer, carry a sample to guide him in finding the right laminate replacement for you at the shop.

 

  • Replace the Laminate Planks

Reinstalling the laminate planks are super comfortable as long, you get the right size, and have the right adhering tools. So, get the new planks and place them to the floor. Make sure the plank does not entirely seal on the spaces to leave space to put the adhesives.

 

  • Put the Adhesive Glue

One positioning all the planks on the floor, add the adhesive glues on the edges to bind them together. Make sure to add on just enough paste as too much of it may show on the top and too little may not secure them properly.

Leave it to dry for a while before you step on the repaired areas. You can also place a heavy object on the top to strengthen and fasten the adhering.

Important Note to Make:

If you don’t have an idea of how to replace your water damaged laminate floor, consider hiring a professional floor technician to do the work for you. It may cost you a little more, but it is worth it because the job will be done professionally for durability purposes.

 

 

How to Fix A Laminate Floor that is Lifting

repair lifting laminate floors

The laminate tends to lift during the seasons when the humidity is high as the high humid shrinks or expands the laminate boards causing them to rise. If you are faced with such an issue, here are steps to use to repair the raised laminate floors:

The tools needed

You will require; a chisel, hammer, extra laminate boards, and multi-tool.

  • Examine the Floor

The first step is to examine the storeys to determine which plank is raised. You can figure out this process using a straight board. Place it on top of the floor area that is shaky and check the part that is raised more than others, and the wall that the board has extended to.

  • Remove the Skirting Board

Once you find the uneven board, the next step is to remove the skirting board using the chisel and the hammer. Removing the skirting board helps you to view the board to determine the part that is lifted.

  • Mark the Left Board

Using a pencil and slat, mark the board that is raised, and make sure to use the height and length of the even boards.

  • Remove the Part

Once you mark the raised part, remove the extra piece of the laminate using a multi-tool to ensure it is even, and the job is done well. Then clean the area using a vacuum or the cleaning equipment you use to clean the laminate floor. Check if the storey is flat, and then place back the skirting board.

 

Can I Fix Bubbled Laminate Floors?

repair bubbled laminate floors

The answer to this question is yes! You can quickly fix the problem of the laminate floor bubbling.

What Causes the Laminate Floor to Bubble?

This occurs as a result of one or more laminate planks swelling, and you can fix the problem without even removing the whole board.

All you need is to find the part that has bubbles and remove the wall molding with the bubbles. You can use tools to remove the mold for safety and prevent interfering with the other parts of the floors.

If the bubbling is used by inadequate gaping of the floorboards, place the boards the right, and if the laminate requires replacement, make sure to do so.

 

How to Prevent Damages for Laminate Floors?

prevent damage for laminate floors

Laminate floors are quite delicate and prone to constant damages from scratches, dents, bubbling, and even scuff marks. The storeys tend to get damaged, especially in areas that are frequented maybe around the living room, balcony, or even in the kitchen.

So, to protect the laminate floors, from such damages, you can use the following tips:

Put some protective pads beneath the furniture legs to protect the floor from scratches in case the chairs are dragged around.
You can opt to raise the furniture when moving it instead of dragging on the floor.

Keep sharp objects lying flat or place them with the sharp edges facing up to safeguard the storey. Regularly check your plumbing parts, and if you notice leakage may be under the sink, repair it before the water floods to the room.

 

Conclusion

Laminate floors are quite beautiful, and they accentuate the entire rooms you install them. However, these floors are quite fragile and tend to get damaged pretty fast, especially when exposed to wetness, if you place heavy objects, or even when you drag heavy objects around. The above discussed are some of the methods you can use to repair the laminate floors from varying damage sources.

If you are not sure about how to carry out the repair process, consider hiring a technician to do the work for you. Also, use the above protective measures to safeguard your laminate floor from quick wear and damages.

 

Keep Reading…

 

How to Clean a Carpet with a Steam Mop?

Carpet cleaning can be a tedious task, but using the ideal cleaning method makes the process easy. Steam cleaning is a process of removing dirt particles that stick deep on the carpet fiber. Also, using a steam mop is an excellent way of stain removing, disinfecting, and cleaning carpet.

All you need is water, detergent, and a steam cleaner. Using a steam mop leaves your carpet refreshed and clean as new. This process is easy and does not need the services of a professional carpet cleaner.

 

Benefits of Cleaning Carpet with Steam Cleaner

electric spinning mop

Steam cleaner is an efficient cleaner that can be used to clean different surfaces, including carpets. Steam cleaning a carpet has lots of benefits, some of it is highlighted below:

  • It makes carpet last longer

Generally, regular cleaning of any material would make it last longer, and it is the same and in the case of carpets. Steam cleaning would allow a rug not to lose its bright colors and prevent wear and tear.

  • It is easy to remove stains

Stains can be removed in many ways, but the easiest way to remove stains from carpets is to use steam. The steam would easily remove mold-like stains, grease, and other stains without much stress.

  • It is good for pet owners

Steam cleaners are perfect for pet owners because of their efficiency in killing germs and bacterias. It makes the environment a lot cleaner to take care of the pets.

  • It removes odors

Too many stains bring about odor on the carpet; using a steam cleaner is the best way to deodorize your carpet.

  • It kills bed bugs and fleas

Fleas are insects that should not be in the human house because of the effects of flea bites. The same thing goes with bed bugs, too, which is why a steam cleaner is ideal for killing fleas and insects.

 

How to Clean a Carpet with a Steam Mop?

benefits of steam cleaning carpet

It is best to clean a carpet with a steam cleaner, and it is also essential to get all the proper attachments for the cleaning to be perfect. You would also need a regular vacuum cleaner to remove dust from the carpet.

Read below the step-by-step process to clean a carpet:

Step 1:

best buy lightweight steam mop

The first thing to do when you want to steam clean your house is to clear the room. You need to clear the room so that the steam cleaner would have enough space to move around during the cleaning.

It would help if you also covered the furniture legs with waterproof tapes; you can also use aluminum foil to cover the furniture legs.

After clearing the room, the next step is to vacuum the floor. It is recommended that you clean the surface twice to remove dust, hair, crumbs, and other particles on the carpet and focus more on the high traffic areas.

Step 2:

cleaning the spot on floor carpet

The next step is to take care of spot stains like food and drink spills; you need to take care of the spot stains by putting a piece of cloth in stain remover and then use the fabric to dab the stained area until it soaks then allow it to settle for a few minutes before steaming.

Step 3:

Then you fill the water tank with distilled water with a measuring cup as directed in the manual and add cleaning solutions and vinegar into the tank. Ensure you do not add anything that is not recommended in the manual.

Step 4:

handheld mop for sofa

Then you plug the cleaner in an electrical outlet then allow the water to steam up; the best temperature to kill fleas and bugs is 212°F.

Step 5:

And the last step is to do the steam cleaning itself. It would be best to run the steam cleaner over the carpet going from a corner to another. After going a straight line, overlap the straight line when returning, making sure no dirt is missed.

After this then you give the carpet some time to dry off. Steam cleaning dries off almost instantly.

 

Other Options to Clean Carpets

can I use vacuum on concrete floors

There are several other ways to clean a carpet aside from steam cleaning. Steam cleaning is the most efficient method, but other methods include:

  • Vacuum

Using a vacuum cleaner to clean a carpet is also an efficient method clean the carpet. It would help if you had a vacuum cleaner and it does not need water or any cleaning solution. You have to run the vacuum cleaner over the carpet and then run it back in the opposite direction so it would pick every particle of dirt.

  • Washing with solutions

This method is a manual method requiring a brush, soap, cleaning solutions, and water. This method is not as efficient as steam cleaning or vacuum, but it is also a popular carpet cleaning method. You would need to mix the soap and the cleaning solutions in the water, then pour the water on the carpet and use the brush to scrub till it’s clean. This method would need natural sunlight to dry.

 

FAQs

Is it better to use vacuum or steam mops for cleaning?

Generally, steam mops are considered to be the best way to clean a carpet, but it depends on the type of carpet; some carpets are made of synthetic materials that cannot endure the heat of a steam mop, it is better to use a vacuum for this type of carpet.

Does steam mop damage the carpet?

No, the steam mop does not damage carpets, except the steam cleaning was done properly. Most carpet manufacturers recommend steam cleaning!

 

Conclusion

Cleaning a carpet using a steam mop is an excellent way of performing a routine weekly cleaning of your flooring. It removes dirt particles that lie deep down the carpet fabric. To use this machine, you do not need professional cleaning services, but you do it yourself. You first remove furniture on top of the carpet and vacuum the room to remove dust and hair.

In case of any stains, you should pre-treat because not all stains are removable by the steam cleaner. Then attach the glider to the head of the steam mop and fill the tank to the maximum capacity. Start steaming your room from the far corner of the room and clean along a straight line. Finally, leave your carpet to dry completely to prevent mold and mildew later on.

 

How to Clean Marble Floors?

There is no denying that regularly cleaning marble floors is an inescapable task. It is neither the easiest nor the most challenging job, but you need a little guidance.

Here are a few things to keep in mind about ‘how to clean marble floors’ and tools that work well on this kind of floor.

what is the best way to clean marble floors

 

What Are the Best Types of Mops to Clean Marble Floors?

As you look forward to cleaning your marble floor, you will always want the best mops. The soft nature of marble floors means that you should focus on relatively non-abrasive options.

The choice will always be between vacuum and steam mops, as they assure you of enhanced reliability and performance. Here are a few insights into each option.

1. Vacuum

This option comes in handy for removing dirt and dust on marble floors. It would be best if you were careful when using a vacuum on this floor. This way, you will readily avoid scratching the floor in the long run.

In most cases, a small or lightweight canister will be enough to remove any dust and dirt on the surfaces. Once the floor is free from this dust, it will be okay to go on with the standard vacuuming procedure.

2. Steam Mop

You can barely overlook the significance of using a steam mop on marble surfaces.

Thanks to the high pressure and temperature provided by these steam mops, removing grime and dirt on marble floors will be seamless. This steam helps cut through grime and dirt, making the process relatively straightforward.

The benefits drawn by steam mops are almost impossible to overstate. These mops do not only disinfect but also sanitize the surface, leaving you with a healthier floor in the long run. As if that is not enough, using steam mops on marble floors tends to be much faster and efficient. 

 

Tips on Choosing Floor Cleaner for Marble Tiles

how to restore shine to marble floors

1. Use a cleaner with a low PH in acidity because highly acidic cleaners may damage your floor.

2. Avoid using products such as Ammonia, Vinegar, Hydrogen peroxide or bleach. Using these products may leave etch marks on the marble surface.

3. Do not use tub cleaning powder and creams on your marble floor because it has some abrasives that scratch the surface.

4. Use the marble cleaner specified for your marble floor at the marble store. Ensure that you enquire about the right marble cleaner at the store.

 

What Are the Best Ways to Clean Marble Floors?

Perhaps you are new to marble floors, and you are not sure which method is best for you. Well, you are not alone, as this is a concern shared by most people. Here are a few insights into what to do to different marble floors.

Things to use in cleaning marble floors

In most cases, you will want to use the following tools.

  • A soft piece of cloth or towel
  • Distilled, hot water
  • Microfiber mop, or any soft mop, vacuum cleaners/steam mops
  • pH-neutral detergent and vinegar
  • Clean water
  • Broom

Steps of cleaning marble floors

Step 1: Use distilled hot water 

Take the time to boil your distilled water, as this will ensure it cuts through the grime. Besides, hot water ensures that you do not depend on harsh solvents in the long run. Remember, using distilled water aims at not staining your marble floor.

However, distilled water is the best since it lacks impurities that can stain your floor. It is good to note that a distillation process removes any minerals that can stain, damage, or discolor your floor.

Step 2: Add a little detergent to the water 

Before you start cleaning your marble floor, it advisable to remember you are dealing with a porous surface. Thus, select mild or ph-neutral detergents. The result they will have minimal risk to your floor and skin if it comes in contact.

Usually, you will have to add two to three drops of mild detergents to the water. Whether you consider dish soap or any other pH-neutral detergent, you will have no reason to worry.

Step 3: Dip your mop in the solution 

Mostly, using a soft microfiber mop will suffice at this time. Dip it, wring it, and systematically mop your floor. Preferably, use overlapping strokes during the process.

Starts cleaning with the farthest corner of your room as you work your way towards the entrance door. All you need are short strokes, dipping, and wringing water out to avoid the spread of dirt as you use.

Step 4: Rinse the floor 

Use clean water to mop and rinse the floor. Rinsing ensures that you pick up any remaining debris or grime on the floor.

  • Ensure that every time you complete mopping with hot water and detergent, rinse off the detergent in your mop.
  • Then go forth and fill a bucket with clean, cool water.
  • Repeat the same procedure of dipping and wriggling.
  • Mopping for a second time helps to remove out any residual or detergent remains.

 

How to Clean Marble Tiles in the Bathroom?

cleaning marble tile

There is no denying that marble floors in the bathroom tend to be porous and relatively soft. For this reason, being careful is worth embracing. Such will be the time to consider the following steps.

Safety precautions before cleaning your bathroom marble floor

Marble is very slippery and is known to cause people severe accidents because you can easily slide and fall. Before you attempt to clean your marble floor, note the following:

  • Do not clean the marble floor when you are under the influence of alcohol or any other drug.
  • Do not clean a surface if there is poor lighting since visibility is low.
  • Ensure that you wear well-treaded shoes that will allow traction with the slippery marble floor.
  • Avoid coming into contact with acidic products as they may corrode your skin. Use a pair of gloves
  • Ensure that you store your toiletry items, such as your bathing soap and body scrub properly, to prevent coming into contact with some cleaning agents. They may be acidic and can cause harm to your skin.

Steps of cleaning bathroom floors

  • Ensure that you clean spillages 

Undoubtedly, spillages on marble floors will often be detrimental. Ensure that you clean the floor immediately there is a spillage, as any delay could expose the surface to discoloration.

  • Use hot distilled water 

Hot water will ensure that you remove grime and dirt on the surface without too much hassle. It will also ensure that your floor does not remain with stains.

  • Add mild detergents 

Now is not the time to use ammonia or any harsh detergent. Usually, pH-neutral soaps will come in handy at this time. You could also go for vinegar, as it will cleanse the floor and even kill bacteria.

  • Use a soft cloth 

Take the time to use a soft cloth to clean the surface of your bathroom. It is through this that you will be sure of less aggression on the marble floor. Once you finish, use a dry, soft cloth to rinse this floor.

 

How to Clean Grout on Marble Floors?

There is no denying that grout could be relatively tough to clean or remove from marble floors. Unless you understand the right procedure, you could end up draining yourself.

First, it will be fair to mention that you should never use grout cleaning products. They will compromise the integrity of your surface. Here is a process you should stick to at this time.

•    Make a perfect blend of four cups of water and a quarter a cup of sugar
•    Heat it until it reaches its boiling point
•    Soak a few paper towels in this boiling solution
•    Place the soaked paper towel on the stubborn grime and wait for about an hour
•    Dip a soft cloth or microfiber mop in hot, distilled water and start mopping the affected area
•    Keep doing so until the grime comes off
•    Rinse with hot, distilled water

 

 How to Clean Honed Marble Floors?

Not many homeowners understand how to clean their honed marble floors. First, you do not need specific marble cleaners when handling honed surfaces.

Regardless of the type of finish, your aim should be to use safe products. Usually, non-abrasive scrubbers will suffice at this time, as they ensure you do not compromise the smoothness of your floor.

Further, ensure that you avoid any harsh chemicals, including ammonia and bleach. Like the previous surfaces, pH-neutral soaps and detergents will come in handy at this time. Here is what you should do.

•    Prepare a solution of distilled hot water with pH-neutral soap
•    Take the time to wipe away any mold or mildew using a non-abrasive cloth
•    Dip a clean, soft cloth in the solution and carefully wipe the honed surface
•    Rinse the surface

 

How to Remove Stains from Marble Floor?

how to disinfect marble floors

Your floor may contain different kinds of stains, and you have no idea how to clean them. Below are stains that may occur on your marble floor:

  •  Ink or Paint Removal

Paint stains mostly appear after the house’s construction is over and after renovations. This is a common problem, and it should not worry you.

Apply the lacquer on the affected surface and scratch off the paint, sing the thin blade. Be gentle to avoid destroying the marble.

If the paint on the surface is quite thick, use a standard paint remover. It costs around $13 to $15 per 960 ml depending on the manufacturer and store.

  • Oil-based and Biological Stains Removal

Common oil-based stains may be such as petroleum jelly, body lotions, and even greasy foodstuff.

Biological stains are those that decompose quickly, like plants. To treat the affected surface, clean gently using a cloth and a solution, preferably acetone and mineral spirit.

  • Rust Removal

When iron objects such as pins and nails fall on the bathroom floor, they get into contact with water, and the result is brown rust that forms. It leaves some brown marks on the floor that can be hard to get rid of.

Apply a marble poultice on the affected area. It helps by removing tough stains that have deep-set on the wet bathroom surface. Making a marble poultice may be a challenge to you, but you can also do it yourself to reduce the cost of hiring someone to do it or you.

It would help if you made it using a good rust remover. It will cost you around $5 – $60, depending on the quantity you may need. To make marble poultice, you mix one glass of the rust remover solvent with a solid absorbent material.

After applying the poultice to the stain, wait for two days until it dries completely. Remove the dried poultice gently using the thin blade. Afterward, clean the surface and dry it with a smooth towel.

  • Paint

There is no denying that spills and stains will always affect the beauty of your floor. Unless you understand how to remove such stains, you could end up making things worse. Usually, you will have to follow the following when removing paint from the surfaces.

Get a perfect mix of lacquer thinner and apply it on the affected area

Leave the thinner on it for a few minutes

Using a razor blade, scrape the softened paint from the surface

Once you remove the paint, dip a piece of soft towel in hot water and wipe the affected area

Rinse the surface using clean water

Indeed, there are instances when the paint on the surface could be too much for you to handle. In this case, it would be best if you contacted the local marble care experts.

  •  Water Stains

With a soft towel and a marble cleaner, ensure that you wipe the surface until the stain disappears. You could also use hot and distilled water.

If the stain is stubborn, you will want to consider grade #0000 steel wool. Rub this steel wool in a circular motion around the affected area. Keep doing it until the patch buffs.

If either of these approaches works, you will have to consider using a marble cleaner. This cleaner comes in handy when dealing with hard water patches and soap scum stains. Apply the cleaner on the affected area and rub it using a soft piece of cloth.

  • Other Stubborn Stains

The process of removing stains from marble floors will often vary with the type. Usually, these stains could be oil-based, organic, or rust.

For instance, you will need a rust remover when handling rust patches. Ensure that the chosen solvent is non-acidic, as this will cushion the problem from worsening.

The standard procedure for removing the oil-based and organic stains will always be using marble poultice.

  • Once you make a perfect mixture of your poultice, apply it to the affected area in circular motions.
  • Repeat this until the stain disappears.

If it does not work, do not shy away from getting professional help.

 

How to Avoid Streaks on Marble Floors?

how to clean marble floor with baking soda

Everyone looks forward to cleaning their marble floors without leaving streaks. You are no exception. In most cases, you will need a pinch of alcohol and pH-neutral detergent to get the job done. Whether you are cleaning grout or grime, the effects and the process will be the same.

  • You will have to mix warm water with a few squirts of liquid pH-neutral detergents.
  • You will also need to add a cup of alcohol in this warm water.
  • Once you get a perfect solution, dip in it a soft piece of cloth or microfiber mop.
  • Wipe the floor with this damp towel or mop carefully yet thoroughly.
  • Rinse the surface with clean water, and you will be good to go.

 

What Not to Do When Cleaning Marble Floors?

how to take care of marble floors

Unlike what many people assume, marble floor cleaning is a straightforward process for those who understand what to do. The catch is to ensure that you do it regularly, as this leaves your surfaces sparkling.

But is that enough? No. Ensure that you understand the dos and don’ts of the process. Here are a few things you should avoid when cleaning marble floors.

1. Do not seal the floor from time to time

The harm caused by the regular sealing of marble floors is unimaginable. Some of these marbles do not require such sealing at all. For this reason, take the time to understand what your choice brings on the table.

Applying too much sealant on the floor means that your coat will be uneven. That is because these floors barely absorb excess adhesives, leaving you with an unpleasant surface.

2. Never leave the floor wet

You can hardly overlook the vulnerability that marble floors have to wetness. From patches and stains to low integrity, this is not something you will want on your surface. With their porous nature, they will absorb the water and leave you with a relatively dull appearance.

Take the time to wipe away any water on the surface. Preferably, use microfiber mops or soft towels during this time.

3. Do not rely on anti-scaling agents

Anti-scaling agents have proven to be behind dull marble floors. Using them will only translate to the damage of your surface in the long run. Remember, marble is relatively sensitive, and getting stains will happen within a short time.

4. Do not sit or even stand on marble countertops

There is no denying that marble floors are less flexible and robust. For this reason, leaning against them could lead to their breakage or even injuries on your body.

5. Don’t air-dry your marble floor

Any cleaner should never let the marble floor air-dry.

Marble absorbs water, and detergent remains, thus discoloring your floor. Once you are done moping your floor, use a clean, dry cloth to dry your surface.

This process of drying your floor with a cloth makes maple cleaning demanding and hard. Though the result is brilliant and helps you maintain your floor to the required standard.

 

What Is the Best Way to Polish Marble Floorings?

You polish your floor depending on the magnitude of grime that is affecting the surface. If it has a stain, you will have to remove them to leave the surface sparkling clean.

It is advisable to deal with stains or spills that get on your floor immediately. It happens because when stains sit on this floor for long, they become difficult to remove. Here is how to remove marble stains from your floor.

1. In this method, you will require water, baking soda. Plastic wrap, a small bowl, and a soft piece of cloth.

2. You start by combing water and baking soda in your small bowl to form a paste.

3. Apply the paste on the areas with stain and cover with the plastic wrap. Let the paste sit on the area for at least 24houyrs to give it time to absorb the stain.

4. Remove the plastic wrap and the paste. Dip the soft cloth in water and wipe off the paste residue. That way, your marble floor will be stain-free. You can use this solution in removing water stains from the marble floor, countertops, or sink.

 

How to Take Care of Your Marble Tile Floors?

how to clean marble floor in bathroom

Before any cleaning is done, ensure that regular maintenance and preventive measures adhere to daily. It’s is essential to take care of every spills and liquid that can stain your floor.

In this segment, we aspire to educate the user on the procedure required to maintain your marble floor in the long term.

1. Clean Spills

Any spills should be clean as it happens. These actions prevent your marble floor from absorbing standing water. As a result, it protects the floor from stubborn stains and discoloring. Use dumb clothe when cleaning off spills.

2. Use Mild Detergent

When buying a detergent, it is advisable to use a ph-neutral product. The products are normally gentle to your surfaces. The ph-neutral product cannot be compared to alkaline and acid products.

Though a product like vinegar are common with many home cleaners and are usable in cleaning several floors like tiles. With marble, never try it. This is because vinegar is acidic, and it has a high chance of destroying your floor.

You should also avoid these products; ammonia, citrus cleaners, and ceramic floor cleaner.

3. Avoid and Clean Marks

how to buff marble floor

Scuff marks are caused by drugging sneakers or furniture’s on the surface of your floor. As a result, they cause flaws that affect the beauty of your marble floor.

However, most of these marks are removable using mops, but those stubborn scuff marks use a felt pad.

During this process, apply a mild detergent and water to your felt pad, then use it to rub along the line caused.

4. Consider Marble Sealer

The use of a marble sealer helps to preserve your floor. Marble sealers are locally found at any improvement store or online platform.

5. Apply Baking Soda

If your marble floors get stubborn stains. Baking soda should be applied in small doses taking caution and care. Since it is a mild abrasive cleaner, much force is not needed.

The process of removing these stains is done by rubbing a soft cloth on the surface gently. The baking soda should not be left on the surface of your floor for long as it dulls the glossy finish.

6. Use Rugs and Carpets

Ensure that you place some mats on places where traffic is enormous to protect your surface from scuffs.

Putting a doormat on the entrance of your protect your surface from dust. Since marble becomes very during the winter season, carpets will help you keep warm

 

How to Protect Your Rest Room Marble Floor?

how to clean marble tile shower

Below are the methods you should consider taking to protect your marble floor:

  • Ensure that you avoid going with foreign substances such as foodstuff or drinks in the bathroom. You may end up spilling such substances on the marble floor.
  • Avoid entering with dirty flip-flops in the bathroom. It would be best if you designated some unique flip-flops to use when entering the bathroom.
  • Place a rug on the bathroom pathway to help clean your feet as you are entering the bathroom. This will help you to leave the dirty particles on the rug that you can dust off later.
  • Never procrastinate cleaning your bathroom. Do it whenever you see a stain on the floor. This will help by stopping any build-up of mold or soap scum on the marble.

 

FAQs

1. Can I Clean Marble Floors with Baking Soda?

Yes. You could add a few tablespoonfuls of baking soda to your warm, distilled water. Ensure that you mix it with pH-neutral detergent. Using a microfiber mop, wipe your floor.

2. Can I Clean My Marble Floors with Vinegar?

Cleaning marble floors with acidic solutions is a big no. Vinegar is no exception in this case. The use of vinegar will only make your surface much duller.

The appearance of stains will also be inescapable in some instances. For this reason, the best way out is to avoid the use of vinegar on marble floors. It will ensure that you enjoy not only sparkling but also longlasting marble floors in the long run.

 

Conclusion

As long as you understand how to clean marble floors, you will be confident of their enhanced longevity. Thankfully, the insights provided above are worth relying on in this mission.

Take each precaution, and religiously so. This way, you will be sure of the best results.

 

How to Clean a Mop?

Mops should be well taken care of because that is what cleans our floors, but most people tend to ignore this. Some mops carry more bacterias and dirt than you think.

So, you should always make sure that your mop heads are clean and dry before the next use. Reading to get the tips on how to clean a mop!

 

How to Clean a Dust and Wet Mop Head?

Mops head should always be cleaned because cleaning them helps prevent the spread of bacteria hence keeping them working at their best.

Some mop heads are made from cotton fiber, and when it’s left for long without being cleaned they can develop bacteria and molds, a clean mop works best always soak mop heads overnight. There are several steps you need to follow when cleaning mop heads and are:

  • Mop with detachable mop head

tips to clean detachable mop head

Re-attach the mop heads from the handles and place the mop heads into a deep sink or inside a lot of water in a bucket.

Pour soap and bleach on the mop head and add boiling water, ensure that the fibers are all inside the water (submerged).

Use hot water to rinse the soap and bleach from the mop heads; you can now hang them to dry.

Return the mop heads to the handles and ensure that you tighten them well. Every other time you use your mop to ensure that the mop heads are clean don’t leave them dirty even for a single day.

You can put also these in the washing machine. But be conscious of what you’ll use to wash. You won’t need the dirt from the mop transferring to your delicate clothes. If your mop is spongy, you can put it in a dishwasher. This procedure is applicable to sponge mops and microfiber mop types.

Dust mop heads have a bad smell, and they easily get damaged. Therefore, if you want to cut the cost of buying new mops every now and then you need to keep them clean.

  • Mops with fixed heads

how to clean fixed mop head

Most people prefer using natural products like vinegar for cleaning the home. You can also use bleach to disinfect the mop. String mop types belong to this category, and you can also follow the tips to clean industrial mop with large mop head.

If your mop head is not detachable, fill a bucket with an equal quantity of bleach and water. Dunk your mop into the solution and leave to sit for about 15 minutes. After soaking, rinse until all the water is fine and the bleach is neutralized.

 

How to clean the mop with a Bucket?

how to clean a mop with bucket

To clean the mop bucket, protect yourself using gloves. Sometimes, the dirty water stored in the bucket may have dirt residue containing bacteria and harmful contaminants that you can’t handle with your hands.

  • Rinse the mop well using warm water.
  • Put one gallon of water and a cup of bleach in a mop bucket. Don’t use bleach if you use a cleaning solution. Instead, use hot water and vinegar. The aim is to avoid a mixture of bleach and ammonia that may produce dangerously toxic gas.
  • Leave the bleach solution to remain in the bucket for a minimum of five minutes.
  • Scrub the inner part of the bucket with a scouring sponge.
  • Wash all chambers and attachments using the bleach solution.
  • When you’re sure the bucket is neat, rinse off using plain water and turn it upside down, so the water drains off.

It is important to disinfect your mop bucket weekly because it always contacts dirt.

 

How to Clean the Steam Mop?

 

Step 1. The first step to cleaning your steam mop is unplugging it from the power outlet. You won’t want an accident, so you must keep your steam mop unplugged.

Step 2. Ensure the steam mop is empty, don’t be tempted to leave the steam mop with water in the tank when you’re not using it, and develop a bad smell, so it is best to empty the tank after each use.

Step 3. Clean the water tank properly because it often gathers dirt and grime. Sometimes cloudy limescale may develop, and it’s best to remove it using vinegar. Dilute the vinegar with lots of water because it is acidic. Clean with a cloth and ensure the water tank is very dry before putting it back to the machine.

Step 4. Clean the nozzle of the water tank occasionally. Hard water often contains minerals and limestone, and they can block the nozzle over time.  Steam mops like the Bissell steam mops need a screwdriver to remove the base plate, usually located in the base. Shark steam mops come with a nozzle cleaner you can use in unblocking the nozzle.

Step 5. Change or wash the mop pads. After every use, it is after washing the mop to stop the build-up of bacteria. If your pads are disposable, change them and attach another one to your mop head.

Step 6. Wipe the exterior of the steam mop, including anywhere moisture, is spotted. Do this with a dry cloth, and you can store it afterward.

 

Can You Machine-wash Your Mop Head?

can you machine wash your mop

You can wash your mop head in a machine using a gentle cycle with hot water and soft detergent.

Squeeze out excess water and hang the mop head on a rack or line to dry before using again. You can machine-wash a mop with a detachable head and put it straight into the machine.

It’s best to wash your mop head with other cleaning materials and pour bleach into the washer to sanitize it. After that, wring out the mop and leave to dry.

 

How to Remove the Odor from a Smelly Mop?

To eliminate odor from a smelly mop:

  • Mix one cup of white vinegar and a gallon of hot water.
  • Allow the mop head to soak for a certain amount of time, about ten minutes, before wringing it out.
  • Leave it outside to dry in the sun.
  • Store your mop upside down. You can use a few household essentials you have at home, like salt, coffee, vinegar, hydrogen peroxide, baking soda, etc., to neutralize the foul odor from your smelly mop.

 

When Should I Replace a Mop Head?

 

When you look at your mop and you notice that it’s getting old, tired, or worn out, giving off a nasty odor, or having a fun color that’s a clear indication that the mop head needs to be changed. An old mop will not work as it is required to, a mop that has bits missing from the head will not perform a good task making the mopping operation longer and tougher.

There is no point of using a mop that gives you a hard time simply replaces the mop heads as soon as it starts to wear off.

 

Guides on Taking Care of Mops in Daily Use

Just like any other piece of furniture, a mop should be taken care of. Mops are wonderful tools for keeping our floors clean. Most of us do not know how to clean a mop; you should not worry because here are the several ways of how to clean them.

1. Rinse the Mop After Each Use

After using a mop, ensure that you rinse them thoroughly; don’t leave your mop dirty. Rinse any cleaning solution and dirt from the mop; dirt will spread grime the next time you use it while the residue remains damages a mop.

2. Wash Your Mop

There is a difference between washing and rinsing, in this case, your mop should be washed and if it’s machine washable, use a washing machine to clean it while if it can not be washed by machine use a mixture of water and bleach to clean the mop, soak the mop head in the mixture for about 15 minutes and then rinse the mop head until the water turns clear indicating that it is clean.

3. Give it Time to Dry

Make sure that the mop dries well to prevent bacteria from growing, for your mop to dry well wring it out as much as possible after that place the mop head outside; the sunshine will kill bacteria and mold. The main reason why a mop head should dry out well is to prevent the growth of bacteria and mildew.

4. Properly Store the Mop

Your mop is already clean; you are, therefore, needed to store it in a cool, dry place. Hang it somewhere and ensure that the mop head does not brush against the floor.

 

Where Should I Store My Mop?

A mop should be stored in a cool, dry place that’s the perfect storage location. Hang it so that it does not brush against the floor, mops should be stored on a wall-mounted rack. Most homes do not have utility rooms, but you can store them under the stairs or on available spaces in one of your wardrobes.

Remember that you can’t store them at this place when they are not clean or dirty. Set aside whatever space you can and if you don’t have enough space, install a low height shelf and hooks on the inside of the door where you can hang your mops.

Most people love hanging their brooms at their bathrooms, the best way to store your mops is in the utility closet because it has hooks that you can hang your mops.

 

FAQ:

How often should I clean my mop?

Replace your mop head so that it does not give you a hard time when cleaning, replace them every two or three months if you use it frequently.

Can shark and Bissell mop pad be washed?

You can rinse your steam mop pads after soaking them. If they are not too dirty, or you’re in a hurry, you can leave them in a washing machine. Choose the delicate or hand-wash cycle so it prolongs the pad’s life with little use of detergent.

Can I wash my mop with vinegar?

Vinegar often serves as a cleaning agent. To clean your mop with vinegar, fill a bucket with hot water and add a little white vinegar. It will help get rid of grease and oils from your mop. Soak the mop in vinegar solution for about five minutes and rinse off the mop head till the water is neat.

How to Polish Hardwood Floors?

Polishing hardwood floors can be daunting work if you do not learn the right ways to go about it. Getting a clear understanding of how to polish hardwood floors correctly, what you should do and not do will determine how perfect your hardwood floor will end up looking like.

There are many benefits attached to polishing your hardwood floors. You will enable them to maintain their shiny appearances by reducing the chances of them getting exposed to scratches.

Polishing ensures total protection to the outer layers, thus making your floors last for an extended period. Here we will dive into the step by step guide and some considerations you need to pay attention to.

how to polish wood floors naturally

How to make hardwood floor shine again?

It’s every cleaner’s goal to keep your hardwood floor shiny all the time. However, many of you don’t know what to do or do not understand the steps and the necessary preparations that could lead to this achievement.

Then follow the following steps to a successful get over it:

Before doing the job, collect all the cleaning detergents and other equipment such as a sponge mop, a broom, flathead mop, microfiber mop, wood floor polish, a dustpan, and hardwood floor cleaner.

Step 1. Carefully test the finishes of your wood floors

When you are not sure of the type of wood floor they have, how do you test the finish of your wood floor?

You can scrape off a small part of your wood floor from an inconspicuous area using a sharp knife blade; if you find out that the finish is smudged and the material is not clear means that your floor’s finish is penetrating.

You should stop there and avoid as much as possible not to polish them, and instead, they should only be waxed.

However, if the material is explicit, it means your flooring material has a finish; therefore, polishing these wood materials is possible. But you will still be required to test out the polish before getting into the main cleaning procedure.

Step 2. Remove dust and clean off the dirt from your wood floors

how to clean and shine hardwood floors

You make this look much easier, especially by emptying the room, remove all the furniture or any other house equipment available.

Thoroughly clean the floor and remove all the dirt and any accumulated dust; you can do this by sweeping or vacuuming, then start moping your hardwood floor using a commercial wood floor cleaner.

You have an option of using dish soap with some water to remove any stubborn like stains. Use clean water to finalize the cleaning together with a water-dampened mop to help you get rid of any cleaner residues.

Finally, you will be required to completely dry your floor using a clean piece of towel clothing or any other preferable material.

Step3. Polish your wood floors to shine

how to polish polyurethane hardwood floors

It is the most crucial cleaning step that will determine how shiny your wood floors will look like.

Start from the furthest back corner of your end room, come up with a polishing path that will enable you to end near your room’s main exit.

Do this by pouring small amounts of S-shaped wood floor polish on your floor. Here you will need to use a flat surface mop to distribute the polish evenly. Use the forth and back techniques to work on the polish solution, ensure you smoothen out any air bubbles that might appear on the surface.

To bring about perfect results, you should consider working on small surface areas as it enables you to control your polish and watch every move you make entirely.

For quick and easy drying, ensure you apply thin layers, and if you feel like they are not enough, you can add another thin layer if possible.

Step 4. Do not restore the room for at least 24 hours

To ensure that nothing goes wrong after polishing your floor, restrict any traffics for at least 24 hours; this will ensure that the polish sticks better and does not chip off easily.

Moreover, it will prevent scratches which might be as a result of getting your furniture in the house. However, even after those hours, restoring your room shall be done carefully.

 

Things you should avoid for polishing hardwood floors

You might be wondering what makes your hardwood look dull; here are some things that can make your hardwood dull, and you will need to avoid them to achieve the best texture for your floor:

Dirt redistribution. This always happens when one uses a dirty mop, forgets or does not sweep, vacuum, or dust mop the floor before beginning the whole cleaning process. Dirt will be redistributed and even end up sticking hard on the floor, thus making your floor look dull.

– Use some toxic cleaning materials. Not all cleaning detergents and materials should be used on all kinds of floors. Most of them promise to make your hardwood floor look shiny, but they end up creating whole messes.

Before installing your hardwood, ensure you inquire about the best cleaning methods that work best with that type of floor.

– Half doing your cleaning. It is essential when you start cleaning to ensure that you do not leave it halfway. Ensure you do good buffing to prevent streaking; you can avoid this by using your choice’s microfibers buffers.

– Low hardwood floor refinishing. most hardwood floors always need proper finishing to last long. If your foot is poorly done, you can be assured of it being dull no matter how hard you try cleaning it. You can avoid this by adequately refinishing your floors.

 

Tips for polishing your hardwood floors

how to polish laminate wood floors

Getting your hardwood floors thoroughly cleaned means everything. It is part of their maintenance, and therefore it is essential to learn simple tricks that will always guide you in doing the right thing when cleaning.

The following are the steps you should follow when cleaning your hardwood floors:

1. Remove rugs and furniture in the house; find someone to help you remove the floor surface furniture you want to clean. If you are cleaning alone, consider placing furniture pads under your furniture and push them smoothly to avoid scratching the floor. If there are any rugs, roll them up and remove them too.

2. Vacuum or sweep your floors. This step enables you to get rid of dust and any other debris; before you start vacuum cleaning, confirm whether your vacuum has any rough or plastic parts in the bottom and, if it does, remove them before you continue cleaning. You can, however, use a broom or any other thing to sweep over your floor.

3. Find out your floor’s finish. It is among the most important things to focus on because it guides how you are going to clean your floor. If your floor has a hard finish, consider using less water to clean it, and if it is lacquered, you should wax it instead of using water and other detergents.

4. Mop over the polyurethane floors is a straightforward process that only requires you to mix a little amount of dishwashing soap with warm water. Then wring out your mop until it is damp, then mop your floor gently. You can start by applying smooth strokes, wipe off excess water and liquid and dry the surface.

5. Gently buff the floor. You can use a microfiber piece to polish the floor; it needs one to carefully use their hands and do the buffing process in circular movements. You can choose to use a buffing machine if there is any.

6.Finally, you can get the right polish for your floor and do the polishing to achieve any hardwood floors’ shiny appearance.

 

Dos and Don’ts when buffing hardwood floors

Buffing is a crucial stage for cleaning hardwood floors; it ensures that no extra water of cleaning products remains or stagnates on the floor.

Buffing helps your floor bid a goodbye to the worn out and tired appearances, enable removal of scratches and other minor imperfections.

Therefore, here is what you should do and not do when buffing your hardwood floors:

The Dos

  • Use a buffer or rotary machine to carry out your buffing process; consider using microfiber clothing if there is none. Before getting into it, remove all foreign materials on the floor that might hinder your buffing process.
  • Remove all the wax finishes that might be remained on your hardwood floor when you were polishing. You can do this by applying a wax stripper to your floor and have all the wax removed within a short period.
  • Ensure that your floor is properly cleaned before you buff over it. This can be done by running a mop all through your floor surface to get rid of dirt, and you had already removed dust by vacuuming or sweeping. The cleaning process enables you to achieve the best and shiny appearance on your floor, ensure the polish you apply after cleaning spread out uniformly, and looks perfect.
  • Wait for your hardwood floor to dry up before you continue with buffing and polishing more if you let your hardwood dry properly, your buffing process as easy as you didn’t expect.
  • Handle your buffing process with care, as any small mess can lead to the worst experience.

The Don’ts

  • Avoid buffing hardwood floors with wax remains after polishing.
  • Do not buff dirty floors; this will lead to an increment of scratches and other unwanted appearances.

 

How to Make Your Wood Floors Shine Longer?

how to polish hardwood floors yourself

Having your wood floor shining for as long as you want them makes you proud and more responsible. The following are things you should do to keep your feet always shinning for longer:

Always perfectly clean your floor – Proper cleaning is the first key to making your wood floors shine for longer; make sure you eliminate all the dirt on the floor. They will remain maintained as care is always provided to them; ensure your floor completely dry before you get to the next step.

Use revitalize – As per the package instruction, apply enough revitalizer to your wood floor; it ensures clear drying and minimizes the chances of scratches appearing on your floor. You can use a mop to spread the revitalizer evenly.

Allow proper revitalizer drying – When the revitalizer dries, you can now move in all your furniture and other stuffs; this should take about 45 minutes after your application and distribution. Always do this when cleaning regularly, and all the shiny appearances will be maintained.

 

FAQs

1. How to Polish Hardwood Floors with Buffer?

It is possible to use a buffer for polishing your wood floor in place of floor polish, which is simpler and less procedural. You should follow the following:

– Remove any waxes from the floor before you buff. Waxes can inhibit the buffing process on the hardwood floor; you can get rid of them using a mineral spirit or any other recommendable substance of your choice.

– Keep your floor buffer ready and the polishing pads for buffing, install the buffing pads on your buffer machine, and start controlling the device. Avoid applying too much pressure when polishing the floors.

It is always a two-step process that does not consume much of your time, however it needs some experience to use the buffer machine properly.

2. How to Polish Hardwood Floors without Sanding?

Many people tend to ask how it is possible to polish your hardwood floor without sanding. Here is the trick most of you should know:

– Make use of the store-bought chemical abrasion kit. Find the best DIY kit from any of your local hardware that perfectly suits the type of your hardwood floor. All the brands have the same cleaning procedure; therefore, you will not have to be so picky. The solution is meant to prepare your floor to easily make the old finish fade off and embrace the new polish.

– Consider buffing and coating your floors.

– Finally, you can use a revitalizer to make the finishing process more successful and enable you to maintain a shiny appearance like a polish.

3. How to Buff out Scratches on Wood Floor?

Scratches can make everything worst on your hardwood floor; the following steps should be followed to make it easy for one to buss scratches on the wood floor:

– Identify and try repairing any superficial scratches affecting your floor’s finishes; you can get over this by applying a DIY solution and letting it dry after some time.

– Identify any minor scratches, and repair them before they become intense and hard to deal with; use a protective solution to overcome that; wax is another way of preventing minor scratches.

– Refinish your whole parts and whole parts of the floor; it is wise if you choose to refinish the components or the entire wood floor by sanding to remove the scratches and keep your foot safe and well appearing.

When trying to remove scratches, you should avoid waxing sticks of polythreane floors; instead, apply wax coating to them.

4. How Much Does It Cost to Buff Hardwood Floors?

Refinishing hardwood floors is always affordable as much as you can afford to install them, then maintaining them should not stress you out.

The process is still done depending on the measurements; in most cases, one square foot average costs $3.25 to $5. However, the costs tend to vary due to the task’s difficulties, the total surface area to be covered, and your floor’s conditions.

Each stair thread costs averagely about $40 to $75; the high costs are due to so much time and high skilled need to work on those staircases.

 

Conclusion

Polishing your hardwood floors will lead to you using them for a very long period to maintain their quality and standards. Hardwood floors are the current trends that everyone is installing, they are cost-efficient, and their maintenance procedures are not tiresome.

 

How to Shine Laminate Floors?

Installing laminate flooring comes with several advantages over hardwood flooring in your home. This flooring, which is made of synthetic flooring materials, imitates hardwood floors, and, at the same time, provides you with a cheap and lasting floor.

The natural-looking colors of a laminate floor can make your home augmented. However, to maintain the beauty and shine of your laminate floors, you’ll need the right cleaning solution.

 

How to Get Laminate Floors to Shine?

how to shine laminate floors

You can decide to use a steam mop as the first choice of shining your floor, but this can make your floor lose its adhesiveness. What about using Bona to clean your floors? Will it make your floor shine? And why use Bona anyway, when you can make your cleaning solution in your preference?

Well, below are ways on how to get laminate floors to shine.

1. Sweep or Vacuum the Floor

sweep your laminate floors

Dust and dirt can cause a scratch to your floor, not to mention making your floor look dirty. Therefore, ensure your floor is swept and look clean at least once a week or more if you have kids and pets or an active house. Use the hard floor attachment when you vacuum.

2. Mop your Floor Regularly Using the Right Cleaner

After you vacuum your floor, ensure you wash your floor at least once a week. Spray the cleaner directly into the floor then use a microfiber mop to wipe it. Use a homemade or commercial cleaner, particularly made for laminate. However, avoid using cleaners containing soaps, harsh chemicals, or oil to prevent dullness.

3. Use Floor Mats at Doorways

use a door mat on your floors

Floor mats are designed to catch dirt, moisture, dust and mud, and other particles that can be drawn outside the house. They are also good for welcoming guests. Using mats at the door and other entrances help keep your floor tidy and reduces regular sweeping and mopping.

4. Polish Laminate Flooring

polish your floors

A laminate floor polish helps reduce scuffs and make the floor shine while making sure the floor finish is well protected. Therefore, to make the laminate floor shine, sweep the floor using a vacuum cleaner hard floor supplement to get rid of the dirt and dust and use laminate cleaner methods to mop the floor.

Use a mixture of oil, vinegar, and water in a spray bottle and shake it well before using it. Spray the mixture into the floor and begin cleaning from the furthest corner of the room. You should also ensure you don’t overdo it.

Use a microfiber cloth to rub the solution into the floor in a circular motion. Keep on working each section till you move backward out of the room.

5. Clean the Floor Using Vinegar

use right cleaner on floors

Floor cleaners bought from the store contain chemicals that dull the floor and leave and leave stretches on the floor. A laminate floor should be properly taken care of to make it shine, dissimilar to a hardwood floor that can be waxed.

Fill the bucket with vinegar and water after eliminating the pet hair, dirt, and dust by dry cleaning. The smell of vinegar can be hard to tolerate, and therefore, to mask the odor, add some drops of essential oil.

Wring out all excess water from the cleaning solution using a sponge mop. After that, clean the floor at a time in small sections using the damp mop. Start cleaning from the furthest corner of the room towards the entryway.

Ensure you wring and rinse the mop whenever it gets dirty. You may pour out excessively dirty cleaner and replace it with a new one if the floor contains a lot of grime. Remove the water solution and the vinegar and then refill the bucket with clean water.

Use clean water to repeat the cleaning process. Wipe the Floor dry using a microfiber cloth and do it in a circular motion. This process will polish the floor and bring back its gleam.

 

Tips for Keeping Laminate Floors Shine

laminate floor caring

1. Wipeout water spills

When water spills combine with laminate, it can be disastrous. Therefore, ensure that whenever water spills out, you wipe it out clean and dry the floor.

2. Avoid using things that promote a shine

These might cause waxy build-up that can be challenging to remove.

3. Avoid fine smelly cleaner

These smelly cleaners leave the floor dull and soapy filtrate.

4. Do not use too much vinegar

Vinegar is acidic, hence not the best cleaning solution for your laminate surface. However, many people prefer to use a little bit of vinegar and plenty of hot water to remove pet grime. Excessive use of vinegar can remove the protective cover on your floors.

5. Avoid traditional mop wetting

Traditional mop wetting is not a good idea when you intend to keep your laminate floor shine. Therefore, it is no.

6. Keep the high-heel shoes off the laminate Floor

Avoid using high heels shoes on your laminate floor to maintain its shine and durability.

7. Shave your pet’s nails

Your pet can scrape off the protective seal of your laminate when barking or just walking, and this can allow the intrusion of water during cleaning. Therefore, ensure your pet’s nails are trimmed. Additionally, make sure you place furniture pads under all the tables, and chair legs for the same reason as this also offers maximum protection to your laminate floor.

 

What is the Best Cleaner for Laminate Floors?

Choosing the best liquid for mopping your laminate floor ensures that your floor stays clean and shiny. Abrasive cleaners are thought to destroy the finish as well as homemade cleaners if poorly diluted.

Some well-known cleaners also leave streaks and residues.

Therefore, we’ll look at the best cleaner for laminate floors below. They are;

  • Best Spray Cleaner: Black Diamond Wood and Laminate Floor Cleaner
  • Best Overall for Mop: ZEP Hardwood and Laminate Floor Cleaner
  • Best for Scratches: Rejuvenate All Floor Restorer

 

1. Best Overall Spray: Black Diamond Wood and Laminate Floor Cleaner

laminate floor spray cleaner

If you need a quick and easy shine action on your laminate floor, you should go for the spray cleaner. This type of cleaner is one of the highly-rated cleaners around and is extremely easy to use. It comes when already mixed and needs no rinsing; you just spray and wash away.

Spray cleaner is streak-free and specifically designed for laminate and hardwood floors to eliminate tough stains and prevent future rubbish from gluing to the floor. Once you spray it on a particular spot or across the entire floor, wipe the non-toxic mixture away using a microfiber mop or rag.

Black Diamond spray cleaner is harmless to children or pets and leaves behind a refined, clean odor in your room. It is considered a fan’s favorite and works better than its competitors.

Check the Price on Amazon

 

2. Best Overall Mop: ZEP Hardwood and Laminate Floor Cleaner

laminate floor cleaner mop

A pre-mixed mop solution is a good idea if you are looking for a laminate cleaner for a wider area. The ZEP hardwood and Laminate Floor cleaner works pretty well with a microfiber or a sponge mop and effectively cleans cabinets and baseboards as it cleans and molds floors. This cleaner eliminates dirt and leaves behind a shiny and non-sticky floor and giving it a new look.

Some people say that the ZEP cleaner can leave streaks behind. However, it’s easily treated by polishing it with a towel after mopping. What makes ZEP outstanding is that it doesn’t need to be rinsed; you simply mop and leave.

Check the Price on Amazon

 

3. Best For Scratches: Rejuvenate All Floor Restorer

laminate floors cleaner for scratches

Rejuvenate All Floor Restorer is ideal for heavily scratched laminates. It doesn’t work for laminates only but for all floors and quickly gets rid of imperfections. Rejuvenate dries in less than 50 minutes, and apart from removing scratches, it also adds a shielding layer to block UV rays that cause your floor to fade.

Rejuvenate also makes your Floor safe for your pet and children to run by adding traction of about 50% to your hard floor. Therefore, it’s one of the highly recommended and safe Laminate cleaners.

Check the Price on Amazon

 

What Makes My Laminate Floor Dull?

dull laminate floors

Well, that is a question you sometimes ask yourself and fail to get the correct answer. Your laminate floor can be made dull by the following factors:

  • Use of excess wrong cleaners
  • Use of excess water on your floor
  • Sunlight
  • Substandard Tools and poor cleaning methods
  • Plants and pets

1. Excess Use of  Wrong Cleaners

do not leave too much water on floors

Using any cleaner without having prior knowledge about it can do more damage to your laminate floor, leaving them dull. Moreover, excess use of any cleaner, including the right ones, leads to cleaner build-up leaving behind a sticky floor even after mopping.

Therefore, before using your cleaner on a laminate floor, check with your glass or test first on a hidden area. It’s usually tempting to use more cleaners and soap cleaners on your floor, and it will only leave your floor more messed up rather than clean.

Regularly sweeping or vacuum cleaning your laminate floor helps get rid of dirt and dust particles that could’ve left your floor looking dull. Therefore, a microfiber or dust mop could assist in getting the job done.

2. Use of Too Much Water on Your Floor

Damp mopping is a great method of cleaning a laminate floor. Excess water seeps into the joints of the floorings and fractures between laminate boards, causing swelling as well as buckling and even mist on the wood floor. Therefore, they will damage your floor in worst-case scenarios.

3. Sunlight

Sunlight rays flash daily on the laminate floor almost regularly. This can lead to fading or discoloration of the laminate floor fragment. Therefore, whenever you notice sun rays, protect your floor from direct sunlight by using curtains.

4. Substandard Tools and Poor Cleaning Methods

Using the wrong tools in cleaning can also have a big impact on making your laminate floor dull. Therefore, when cleaning your laminate floor, you need to ensure that you use the correct vacuum cleaners, mops, and steam cleaners.

You should also bear in mind that wood floors, steam cleaners, rag mops, and vacuum cleaners don’t go hand in hand with water hence will damage your floor when used with roller brushes. Therefore, be cautious when selecting tools for cleaning your laminate floor to ensure your floor doesn’t get dull and streak.

Moreover, ensure your furniture pads are intact and wear-free to avoid scuff and gauges that usually make your laminate floor dull.

5. Plants and Pets

do not plants on laminate floors

Water pots filled to their maximum can cause leaks and destruction to your laminate floor. Therefore, you need to be extra careful if you have potted plants on your laminate floor.

Additionally, pet foods and dishes can leave your laminate floor with scratches if you have pets. In extensive cases, they may lead to buckling and warping of your laminate floor. Therefore, consider using pads to ensure the safety of your laminate floor from plant pots and damages caused by pets.

 

Can I Wax Laminate Floors to Make It Shine?

keep laminate floors clean and shine

Laminate flooring is different from hardwood flooring. Yes, they are both made from wood, but their maintenance is different. This begs the question if it’s a good idea to use wax on laminate flooring.

Wax can’t be used on laminate flooring.

Using wax on laminate flooring doesn’t make it shine, unlike hardwood. Furthermore, it can lead to dirt build-up and essentially do the contrary of what it does to hardwood. Therefore, wax makes your laminate floor dull and cloudy instead of making it shiny.

Therefore, to clean your laminate floor, stick with vinegar and water, and a laminate floor cleaner. Be careful of laminate flooring cleaners, though. Ensure your cleaning supplies don’t contain the wax as an ingredient by reading the back label.

 

 

How to Make Linoleum Floors Shine?

Did you know that linoleum floors lose their shine even with regular cleaning? Yes, it will take some time before your floor starts losing shine. However, you need to ensure that you know how to make that dull appearance disappear.

Regular cleaning might not be effective on stubborn dirt on your linoleum floor. Regular mopping will help you maintain a clean home, but the stains will lead to some discoloration. Often the leading cause of the discoloration is a buildup of floor wax.

In this article, I will take you through how to make linoleum floors shine. We will also touch on everything you need to know to maintain a longer shine.

 

How to Shine Linoleum Floors?

linoleum floors

Step 1: Cleaning

Before we can start looking at how to shine the linoleum floors, the first step is a thorough cleaning.  The cleaning procedure is relatively simple for your floor. Start by sweeping or vacuuming the entire floor to remove any dust and dirt particles.

You could always use a dry microfiber to get rid of all the dirt on your linoleum floors. However, note that introducing water before sweeping off all the dirt and dust will turn the entire surface muddy. Cleaning will then become quite complicated and tiresome.

Mop with a solution of vinegar, lukewarm water, and a few drops of dish soap. Use one cup of white vinegar with a gallon of water for a more thorough clean. Understand that you should not use ammonia because it will damage your floor and strip the polish.

You then need to use fresh, clean water to rinse the entire floor. Rinsing is vital in ensuring that all the soap and vinegar residue is removed from the floor. Leaving soap to settle on your linoleum floor will reduce the shine.

Click here to check recommended microfiber mop.

Step 2: Applying Linoleum Wax Shine

Although floor wax isn’t ideal for vinyl floors, it is quite necessary for the upkeep of your linoleum floors. Note that you shouldn’t apply wax after every clean because this could lead to yellowing of the floor. Instead, you only need to apply wax every four to six months.

Regular waxing will help you maintain a shiny look throughout the years and decades to come. However, you need the right product if you want to get that perfect shine. Always use a liquid acrylic floor wax when re-waxing a linoleum floor.

Avoid paste wax because it won’t result in any sort of shine. Yes, it isn’t harmful to your linoleum floor, but it just doesn’t give you the desired shine.

You can start waxing the floor after it is completely dry. Now, waxing alone won’t give you that sparking floor that you need. Proceed to the next step to get a more shiny linoleum floor that will last for a more extended period.

Click here to see hot sale wax.

Step 3: Floor Buffing

Immediately you finish waxing the entire floor; you need to start buffing using a lambswool buffing disk and a floor buffer. Although this step requires a lot of effort, the outcome is always worth it. Getting on your knees and using your hands is a small price to pay for perfection.

It will take you about 30 minutes to buff an average-sized living room or kitchen space. The good news is that you don’t have to buy a linoleum buffer. Go to the local tool rental and get a high-quality linoleum buffer at an affordable price.

 

How to Wax Linoleum Floors to Make Them Shiny?

how to wax linoleum floors

Did you know that your linoleum flooring is sensitive to all acidic cleaning products? Waxing, therefore, help to maintain the beauty of your floor and protect it from the harmful cleaning agents.

However, how do you wax linoleum floors? Well. Let us take an in-depth look at the entire process.

Step 1: Remove Wax Buildup

Use specially designed strippers to remove wax from your linoleum floors. Understand that strippers made for vinyl can be rather harmful to your linoleum floors. You must, therefore, ensure that you purchase strippers that re specially designed for your floor.

Mix the stripper in lukewarm water and slowly apply it over your floor using a mop. Ensure that you give it enough time to soak – about 10 minutes. Work in small sections rather than the entire section at once.

You don’t want the stripper drying on your floor and creating a whole new problem. Use a brush to scrub the sections and mop up with fresh, clean water. Continue with the above steps until you complete the entire floor.

Give your linoleum floor time to dry up completely. Understand that your floor might appear somewhat dull, but this should not be a cause for alarm. However, never use a stripper on newly installed floors since there is no wax to remove.

 

 Step 2: Wax application

You need liquid acrylic wax for your linoleum floors. You will have to use two-three coats for the entire floor. However, you need to give the polish time to dry between the coats. Your floor will develop more shine when you add the extra coat.

You need to apply wax every four to six months to maintain the shine. Note that your floor might only lose shine on the high traffic areas. You can always apply wax to the specific areas that are affected rather than on the entire floor.

Buffing will help you get an even higher sheen. Now, buffing is rather labor-intensive and requires a lot of time. It will take you more than 30 minutes to complete your living room or kitchen space.

Finally, never use sealers for vinyl floors on your linoleum floors. These sealers are harmful to your floor and could cause severe damages. Completely removing all the old wax and applying three new coats of wax is recommended every 18 months.

 

How Can I Make My Linoleum Floor Shine Without Wax?

best mop for linoleum floors

Sometimes, you might want to make your linoleum floor shine without y=using any wax. Well, this is entirely possible when you follow the procedure below.

Requirements

  • Vinegar
  • Hot water
  • Dish soap
  • cleaning bucket
  • Broom
  • Mop
  • Nylon brush
  • Towel

Procedure

  1. Start off by removing all the dust and dirt particles from your linoleum floor using the broom. You could also use a vacuum cleaner for this step. Removing all the dirt on the floor will ensure that the cleaning process is fast and straightforward.
  2. Mix one cup vinegar, a few drops of dish soap, and one-gallon hot water in a cleaning bucket. The cleaning solution you create will give you a much better clean. Clean the entire surface of your floor using the solution.
  3. Sometimes, your linoleum floor might be losing its shine due to yellowing. In such circumstances, what you need is baking soda. Sprinkle baking soda on the affected areas and let it settle. You can then proceed clean using the cleaning mixture above.
  4. Proper cleaning will help restore the shine of your linoleum floor. Always ensure that you rinse your floors after every wash. Using a steam mop is an ideal way of ensuring that all soap residues are removed from your linoleum floor.

 

Tips for Keeping Linoleum Floors Shine

To prolong the life of linoleum floors, you must carry out proper cleaning. Below are a few tips to help you keep linoleum floors shinning.

  1. Always use a dry microfiber mop when removing debris and dust in high traffic areas
  2. Use a vacuum cleaner or soft-bristle brush once a week to remove dust and dirt from the entire floor
  3. Damp-mop your entire floor regularly using a solution of vinegar, hot water, and dish soap.
  4. Always use fresh, clean water to rinse off your linoleum floors
  5. Give your floor time to dry completely
  6. Ensure that there is no standing water on your floor at any time
  7. Perform a deep cleaning at least once every year

 

FAQs About Making Linoleum Floors Shine

clean linoleum floors

1. Can you polish linoleum floors?

Yes, manufacturers recommend that you polish linoleum floors regularly to protect them. Polishing also ensures that your linoleum flooring looks great for longer. You will have to polish your floor when it turns dull due to traffic or wears.

2. Can my linoleum floors shine without using wax?

Yes, you can restore the shine of your linoleum floor without using wax. Mopping with hot water will help you remove dust and dirt buildup. Use a cleaning solution of vinegar, water, and soap dish to clean the floor thoroughly.

3. Can I whiten my yellowed linoleum floor?

Yes, you can whiten your linoleum floor using a solution of chlorine bleach. Let the solution sit for about forty minutes before cleaning up the affected areas. However, more damaged or aged linoleum floors will need the use of dry powder with bleach.

4. Will bleach damage my linoleum floor?

Understand that bleach is safe to use and won’t damage your linoleum floor. However, ensure that you dilute it with plenty of water.

 

Conclusion

It is quite natural for your linoleum floor to lose shine after a few years. The good news is that you can always restore this shine. This guide should help you restore and maintain the shine of your linoleum floor.

Note that you have to perform thorough cleaning at least once a week. Deep cleaning, however, needs to be done twice per year to maintain the shine.

How to Make Vinyl Floors Shine?

From the ability to withstand heavy foot traffic and enhanced durability to affordability, you will find vinyl floors to be the best. Most importantly, it will suffice to mention how easy these floors are to maintain. As long as you give them the shine they so deserve, you will be good to go. However, the big concern is whether you will comfortably attain this shine in the long run.

Various things go into getting an excellent vinyl floor shine. Understanding these elements will be vital in improving not only the shine but also the durability of your floor. Here are a few insights you will want to keep in mind.

 

Why Your Vinyl Floors Become Dull?

how to shine vinyl plank flooring

Vinyl flooring is said to be one of the most durable options when it comes to making a house seem newer and more elegant. Possible reasons why your vinyl floors are not shiny: the sun (UV rays) or saltwater. Vinyl flooring is sensitive to these two things, and they’ll make them look dull over time!

The UV rays of sunlight can cause discoloration on the glossy surface, while saltwater will dry up the natural conditioning oils that keep it looking nice without fading.

Another thing that could ruin this material is dirt, which causes vinyl floors’ colors to become dull because they’re unable not absorb light anymore. Vinyl can also get scratched or even sticky if you don’t take care of them correctly – just like any other surface out there!

 

How to Get My Vinyl Floors Shine?

keep vinyl plank floors shine

As mentioned, lots of things go into ensuring that your vinyl floor regains or maintains its elegance. Undoubtedly, how glowing this floor is will have an impact on how beautiful your interior décor will be. It is in this regard that you will need to invest not only enough effort but also the time in this project.

Most often, this process will involve two critical stages, which could further be subdivided. Cleaning the floor and applying a new finish will often come out as the utmost steps. We take a look at each of these steps and how to make them useful.

  • Clean the Floor

The journey to having a high-gloss shine begins by thoroughly cleaning your floor. Remember, unless you embrace this thoroughness, both dirt and debris will compromise your eventual results.

That the cleaning process of your vinyl floor is straightforward is an understatement. All you will need for this procedure is a mop and clean water. Things become better if you have excellent cleaning products. Always follow these steps.

 

  • Vacuum the Floor

vacuum vinyl floors

Take the time to vacuum or even dry mop your vinyl floor. It is through this that you will effortlessly remove dust, surface dirt, and any hairs on the surface.

Preferably, it would be best if you aimed at reaching even the least accessible spots. Through this, you will make wet mopping much more straightforward.

 

  • Cleanse the Floor

Did you know that apple cider vinegar is the ultimate cleanser for vinyl floors? It comes with an acidity whose ability to remove dirt and grime. All this will get achieved without necessarily building soap or wax. Well, you could also use grape juice or mustard. Most importantly, use a soft, nylon-bristle brush to remove these stains.

 

  • Apply New Gloss

Indeed, there are instances when cleaning is not enough for the best results. In such instances, applying this new finish will come in handy. Usually, this process comes immediately after removing the old finish and thoroughly cleaning your floor. Here is what you will do during this stage.

  • Use a sponge mop to apply the new finish
  • Always start from one side of the room to the other
  • Apply in light, uniform strokes at all times
  • Leave the room for at least 48 hours, and at nothing above 65 degrees F, as this allows for drying
  • Feel free to apply the second coat
  • Ensure that you do not wash this floor for the next five days

Above all, if you want to maintain this outfit and sheen, always ensure that you do not wax it. That is because wax rarely adheres to this coating.

 

How to Get Scratches Out Of Vinyl Flooring?

how to make vinyl floors shine

You can hardly overlook the importance of having a scratch-free vinyl floor. From an improved appearance to better chances of lasting long, this is something that will offer you value for money.

Usually, this process involves a few elements that you will want to take into account. They will include the following.

1. Clean Your Floor – Nothing could be more imperative than deep-cleaning your floor at this time. Usually, you will need enough warm water and dish soap during this stage.

2. Sand the Floor – Sanding your vinyl floor comes in handy in not only smoothing but also buffing out scratches. Preferably, embrace light strokes during the entire process, as this will guarantee you better results.

3. Use Car Wax 

It is only when removing scratches that you will find car wax as a reliable buffing agent.

On the other hand, you could rely on a more straightforward process that involves the following steps. 

  1. Ensure that your room has enough ventilation
  2. Apply a thinner on a soft rag and clean wipe the affected area
  3. After thoroughly rubbing the area, remove any residue present
  4. Place strips of masking tape around the affected area
  5. Pour a little seam sealer on this surface and allow it to dry
  6. Remove the tape

 

How to Polish Vinyl Floors Without Waxing?

how to care for vinyl flooring

Vinyl floors are a nuisance to clean and maintain. The most time-consuming task is polishing them, which can be grueling work if not done correctly! Here’s how you polish vinyl without waxing:

Set up a bucket with the appropriate cleaner and water ratio, use a scrub brush to clean any stains or marks on the floor.

Wipe it dry using old terry towels that have been cut into small squares (or if you don’t want to do this step then use a plain paper towel), and finally buff away in circular motions until all dirt has disappeared. Use these steps regularly for the best results!

Do you have a vinyl floor that needs some love? There are many different things to keep your floors looking their best.

From the most straightforward methods, such as using soapy water and a damp cloth, all the way up to industrial-grade products like Amoroso’s Vinyl Floor Cleaner and Conditioners! Regardless of which method or product is used, it will come down to three simple points:

  • Cleaning with soap and water.
  • Keeping dirt from getting on them in the first place by regularly sweeping.
  • Ensure they dry completely before walking on them again when wet due not only to safety reasons but also because moisture can cause mold growth.

 

Tips for Keeping Vinyl Floors Shine

best floor cleaner for vinyl plank flooring

Indeed, the ultimate goal of any homeowner is to have a long-lasting floor. However, unless you understand how to achieve this, your goal will remain a mirage.

It is in that light that you should have a few tips on how to preserve the sheen of your vinyl flooring.

Some of them will include the following.

1. Use mats  – Did you know that door mats help in sieving the dirt and dust that gets to your vinyl floor? This way, you will be sure that there will be minimal abrasion that could scratch your floor in the long run.

It will always be vital to keep away from latex or rubber mats, as they could result in negative chemical interaction with the floor.

2. Regular cleaning  – As long as you keep cleaning your floor from time to time, there will be no reason to worry about its sheen.

This approach ensures that there is no buildup of grime, dust, or dirt. That way, there will be no room for the floor to lose its shine in the long run.

3. Frequent shining  – Take the time to shine your floor whenever necessary. It will be a great addition to cleaning your floor. What matters the most during this process is that you should refrain from using solvent-based polishes.

4. Use shampoo  – As odd as it might seem, using shampoo is one of the best strategies for maintaining the shine of your vinyl floor. Ensure that you mix it with warm water, and rinse and mop with a damp mop.

5. Apply the right cleanser  – It is hard to overstate how valuable cleansing your vinyl floor is. By using the right cleaning products, you will be confident of enhanced longevity and improved glamor. Apple cider vinegar will always be the ultimate choice for you.

 

FAQs About Making Vinyl Flooring Shine

wax vinyl floors to shine

1. Can I put wax on vinyl floors?

Most often, experts suggest that you do not wax your vinyl floor, especially if it is the newer model. That is because waxing could expose your floor to fading. Instead, you can rely on vinyl floor polish whenever you need to improve the sheen.

 

2. Can I use baby oil to improve the shine of vinyl floors?

Baby oil has indeed proven to be one of the most reliable elements when cleaning vinyl floors. A few drops of this oil will be enough to give you the ultimate glam you have been desiring. Mostly, you will need to use it alongside warm water and vinegar if you need the best results. However, it will suffice to keep in mind that it works when the stains are not very stubborn.

 

3. Can I make my vinyl shine without waxing?

Indeed, waxing is not the only way for you to improve the sheen of your vinyl floor. Interestingly, vinyl floor polish has proven to be more reliable. You could also rely on apple cider vinegar and baby oil at this point. Did you know that regular cleaning will also come n handy for you?

 

Conclusion

In conclusion, vinyl floors are some of the best that you could ever get. Besides their durability and improved appeal, these floors tend to be easy to maintain. Take the time to understand how to clean them and even polish them whenever necessary.

It is through this that you will be confident of reaping the value for your money in the long run. Fortunately, the insights provided above will guide you through this process.