Menu Close

How to Avoid Streaks on Marble Floors?

You just had your marble floors installed and they look fantastic! gleaming white and smooth as can be. You want to keep them looking that way for as long as possible but you’re not quite sure how. Surely there must be some special cleaning solution or method you need to use?

Nope! In fact, taking care of your new marble floors is simpler than you might think. In this blog post, we’ll give you a few tips on how to clean your marble floors so that they stay streak-free and looking their best.

Three Rules for Streak-free Marble Floors

Follow these three simple rules and your marble floors will stay looking great for years to come.

#1 The Best Way to Clean Your Floors is with Regular Maintenance

The key to keeping any floor looking its best is through regular maintenance and cleaning. This is especially true for marble floors which need to be kept free of dirt, dust, and other debris.

The best way to clean your floors is with a damp mop or cloth. Avoid using excessively wet mops orcleaners as this can damage the stone.

If you must use a cleaner, make sure it is mild and specified for use on natural stone surfaces.

#2 Pay Attention to Your Floor’s Finish

One important thing to remember when cleaning your marble floor is to pay attention to the finish. If your floor has a honed finish, it will be more likely to showstreaks or smears.

A polished finish will be more resistant to streaking but can still be damaged by cleaners that are too harsh.

When in doubt, test a small area firstto see how the cleaner reacts before proceeding with the rest of the floor.

#3 Dirt and Debris Can Scratch Your Floor

Another important thing to remember is that dirt and debris can actually scratch your floor’s surface.

This is why it’s important to sweep or vacuum regularlyto pick up any dirt or debris before it has a chance to do any damage.

If you do happen one day to find yourself with a scratched floor, don’t despair! There arevarious ways that you can buff out scratches depending on the severity.

How to Avoid Streaks on Marble Floors?

How to Avoid Streaks on Marble Floors

Everyone looks forward to cleaning their marble floors without leaving streaks. You are no exception. In most cases, you will need a pinch of alcohol and pH-neutral detergent to get the job done. Whether you are cleaning grout or grime, the effects and the process will be the same.

  • You will have to mix warm water with a few squirts of liquid pH-neutral detergents.
  • You will also need to add a cup of alcohol in this warm water.
  • Once you get a perfect solution, dip in it a soft piece of cloth or microfiber mop.
  • Wipe the floor with this damp towel or mop carefully yet thoroughly.
  • Rinse the surface with clean water, and you will be good to go.

What Not to Do When Cleaning Marble Floors?

Unlike what many people assume, marble floor cleaning is a straightforward process for those who understand what to do. The catch is to ensure that you do it regularly, as this leaves your surfaces sparkling.

But is that enough? No. Ensure that you understand the dos and don’ts of the process. Here are a few things you should avoid when cleaning marble floors.

1. Do not seal the floor from time to time

The harm caused by the regular sealing of marble floors is unimaginable. Some of these marbles do not require such sealing at all. For this reason, take the time to understand what your choice brings on the table.

Applying too much sealant on the floor means that your coat will be uneven. That is because these floors barely absorb excess adhesives, leaving you with an unpleasant surface.

2. Never leave the floor wet

You can hardly overlook the vulnerability that marble floors have to wetness. From patches and stains to low integrity, this is not something you will want on your surface. With their porous nature, they will absorb the water and leave you with a relatively dull appearance.

Take the time to wipe away any water on the surface. Preferably, use microfiber mops or soft towels during this time.

3. Do not rely on anti-scaling agents

Anti-scaling agents have proven to be behind dull marble tile floors. Using them will only translate to the damage of your surface in the long run. Remember, marble is relatively sensitive, and getting stains will happen within a short time.

4. Do not sit or even stand on marble countertops

There is no denying that marble floors are less flexible and robust. For this reason, leaning against them could lead to their breakage or even injuries on your body.

5. Don’t air-dry your marble floor

Any cleaner should never let the marble floor air-dry.

Marble absorbs water, and detergent remains, thus discoloring your floor. Once you are done moping your floor, use a clean, dry cloth to dry your surface.

This process of drying your floor with a cloth makes maple cleaning demanding and hard. Though the result is brilliant and helps you maintain your floor to the required standard.


Hopefully these tips help you avoid streaks on your new marble floors! Regular maintenance and sweeping/vacuuming are key for preventing scratchesand preserving the finish of your floors.

If you have any questions about caring for your marble floors or would like more tips, feel free to contact us today!

Rate this post