How to Clean Marble Floors?

There is no denying that regularly cleaning marble floors is an inescapable task. It is neither the easiest nor the most challenging job, but you need a little guidance.

Here are a few things to keep in mind about ‘how to clean marble floors’ and tools that work well on this kind of floor.

what is the best way to clean marble floors

 

What Are the Best Types of Mops to Clean Marble Floors?

As you look forward to cleaning your marble floor, you will always want the best mops. The soft nature of marble floors means that you should focus on relatively non-abrasive options.

The choice will always be between vacuum and steam mops, as they assure you of enhanced reliability and performance. Here are a few insights into each option.

1. Vacuum

This option comes in handy for removing dirt and dust on marble floors. It would be best if you were careful when using a vacuum on this floor. This way, you will readily avoid scratching the floor in the long run.

In most cases, a small or lightweight canister will be enough to remove any dust and dirt on the surfaces. Once the floor is free from this dust, it will be okay to go on with the standard vacuuming procedure.

2. Steam Mop

You can barely overlook the significance of using a steam mop on marble surfaces.

Thanks to the high pressure and temperature provided by these steam mops, removing grime and dirt on marble floors will be seamless. This steam helps cut through grime and dirt, making the process relatively straightforward.

The benefits drawn by steam mops are almost impossible to overstate. These mops do not only disinfect but also sanitize the surface, leaving you with a healthier floor in the long run. As if that is not enough, using steam mops on marble floors tends to be much faster and efficient. 

 

Tips on Choosing Floor Cleaner for Marble Tiles

how to restore shine to marble floors

1. Use a cleaner with a low PH in acidity because highly acidic cleaners may damage your floor.

2. Avoid using products such as Ammonia, Vinegar, Hydrogen peroxide or bleach. Using these products may leave etch marks on the marble surface.

3. Do not use tub cleaning powder and creams on your marble floor because it has some abrasives that scratch the surface.

4. Use the marble cleaner specified for your marble floor at the marble store. Ensure that you enquire about the right marble cleaner at the store.

 

What Are the Best Ways to Clean Marble Floors?

Perhaps you are new to marble floors, and you are not sure which method is best for you. Well, you are not alone, as this is a concern shared by most people. Here are a few insights into what to do to different marble floors.

Things to use in cleaning marble floors

In most cases, you will want to use the following tools.

  • A soft piece of cloth or towel
  • Distilled, hot water
  • Microfiber mop, or any soft mop, vacuum cleaners/steam mops
  • pH-neutral detergent and vinegar
  • Clean water
  • Broom

Steps of cleaning marble floors

Step 1: Use distilled hot water 

Take the time to boil your distilled water, as this will ensure it cuts through the grime. Besides, hot water ensures that you do not depend on harsh solvents in the long run. Remember, using distilled water aims at not staining your marble floor.

However, distilled water is the best since it lacks impurities that can stain your floor. It is good to note that a distillation process removes any minerals that can stain, damage, or discolor your floor.

Step 2: Add a little detergent to the water 

Before you start cleaning your marble floor, it advisable to remember you are dealing with a porous surface. Thus, select mild or ph-neutral detergents. The result they will have minimal risk to your floor and skin if it comes in contact.

Usually, you will have to add two to three drops of mild detergents to the water. Whether you consider dish soap or any other pH-neutral detergent, you will have no reason to worry.

Step 3: Dip your mop in the solution 

Mostly, using a soft microfiber mop will suffice at this time. Dip it, wring it, and systematically mop your floor. Preferably, use overlapping strokes during the process.

Starts cleaning with the farthest corner of your room as you work your way towards the entrance door. All you need are short strokes, dipping, and wringing water out to avoid the spread of dirt as you use.

Step 4: Rinse the floor 

Use clean water to mop and rinse the floor. Rinsing ensures that you pick up any remaining debris or grime on the floor.

  • Ensure that every time you complete mopping with hot water and detergent, rinse off the detergent in your mop.
  • Then go forth and fill a bucket with clean, cool water.
  • Repeat the same procedure of dipping and wriggling.
  • Mopping for a second time helps to remove out any residual or detergent remains.

 

How to Clean Marble Tiles in the Bathroom?

cleaning marble tile

There is no denying that marble floors in the bathroom tend to be porous and relatively soft. For this reason, being careful is worth embracing. Such will be the time to consider the following steps.

Safety precautions before cleaning your bathroom marble floor

Marble is very slippery and is known to cause people severe accidents because you can easily slide and fall. Before you attempt to clean your marble floor, note the following:

  • Do not clean the marble floor when you are under the influence of alcohol or any other drug.
  • Do not clean a surface if there is poor lighting since visibility is low.
  • Ensure that you wear well-treaded shoes that will allow traction with the slippery marble floor.
  • Avoid coming into contact with acidic products as they may corrode your skin. Use a pair of gloves
  • Ensure that you store your toiletry items, such as your bathing soap and body scrub properly, to prevent coming into contact with some cleaning agents. They may be acidic and can cause harm to your skin.

Steps of cleaning bathroom floors

  • Ensure that you clean spillages 

Undoubtedly, spillages on marble floors will often be detrimental. Ensure that you clean the floor immediately there is a spillage, as any delay could expose the surface to discoloration.

  • Use hot distilled water 

Hot water will ensure that you remove grime and dirt on the surface without too much hassle. It will also ensure that your floor does not remain with stains.

  • Add mild detergents 

Now is not the time to use ammonia or any harsh detergent. Usually, pH-neutral soaps will come in handy at this time. You could also go for vinegar, as it will cleanse the floor and even kill bacteria.

  • Use a soft cloth 

Take the time to use a soft cloth to clean the surface of your bathroom. It is through this that you will be sure of less aggression on the marble floor. Once you finish, use a dry, soft cloth to rinse this floor.

 

How to Clean Grout on Marble Floors?

There is no denying that grout could be relatively tough to clean or remove from marble floors. Unless you understand the right procedure, you could end up draining yourself.

First, it will be fair to mention that you should never use grout cleaning products. They will compromise the integrity of your surface. Here is a process you should stick to at this time.

•    Make a perfect blend of four cups of water and a quarter a cup of sugar
•    Heat it until it reaches its boiling point
•    Soak a few paper towels in this boiling solution
•    Place the soaked paper towel on the stubborn grime and wait for about an hour
•    Dip a soft cloth or microfiber mop in hot, distilled water and start mopping the affected area
•    Keep doing so until the grime comes off
•    Rinse with hot, distilled water

 

 How to Clean Honed Marble Floors?

Not many homeowners understand how to clean their honed marble floors. First, you do not need specific marble cleaners when handling honed surfaces.

Regardless of the type of finish, your aim should be to use safe products. Usually, non-abrasive scrubbers will suffice at this time, as they ensure you do not compromise the smoothness of your floor.

Further, ensure that you avoid any harsh chemicals, including ammonia and bleach. Like the previous surfaces, pH-neutral soaps and detergents will come in handy at this time. Here is what you should do.

•    Prepare a solution of distilled hot water with pH-neutral soap
•    Take the time to wipe away any mold or mildew using a non-abrasive cloth
•    Dip a clean, soft cloth in the solution and carefully wipe the honed surface
•    Rinse the surface

 

How to Remove Stains from Marble Floor?

how to disinfect marble floors

Your floor may contain different kinds of stains, and you have no idea how to clean them. Below are stains that may occur on your marble floor:

  •  Ink or Paint Removal

Paint stains mostly appear after the house’s construction is over and after renovations. This is a common problem, and it should not worry you.

Apply the lacquer on the affected surface and scratch off the paint, sing the thin blade. Be gentle to avoid destroying the marble.

If the paint on the surface is quite thick, use a standard paint remover. It costs around $13 to $15 per 960 ml depending on the manufacturer and store.

  • Oil-based and Biological Stains Removal

Common oil-based stains may be such as petroleum jelly, body lotions, and even greasy foodstuff.

Biological stains are those that decompose quickly, like plants. To treat the affected surface, clean gently using a cloth and a solution, preferably acetone and mineral spirit.

  • Rust Removal

When iron objects such as pins and nails fall on the bathroom floor, they get into contact with water, and the result is brown rust that forms. It leaves some brown marks on the floor that can be hard to get rid of.

Apply a marble poultice on the affected area. It helps by removing tough stains that have deep-set on the wet bathroom surface. Making a marble poultice may be a challenge to you, but you can also do it yourself to reduce the cost of hiring someone to do it or you.

It would help if you made it using a good rust remover. It will cost you around $5 – $60, depending on the quantity you may need. To make marble poultice, you mix one glass of the rust remover solvent with a solid absorbent material.

After applying the poultice to the stain, wait for two days until it dries completely. Remove the dried poultice gently using the thin blade. Afterward, clean the surface and dry it with a smooth towel.

  • Paint

There is no denying that spills and stains will always affect the beauty of your floor. Unless you understand how to remove such stains, you could end up making things worse. Usually, you will have to follow the following when removing paint from the surfaces.

Get a perfect mix of lacquer thinner and apply it on the affected area

Leave the thinner on it for a few minutes

Using a razor blade, scrape the softened paint from the surface

Once you remove the paint, dip a piece of soft towel in hot water and wipe the affected area

Rinse the surface using clean water

Indeed, there are instances when the paint on the surface could be too much for you to handle. In this case, it would be best if you contacted the local marble care experts.

  •  Water Stains

With a soft towel and a marble cleaner, ensure that you wipe the surface until the stain disappears. You could also use hot and distilled water.

If the stain is stubborn, you will want to consider grade #0000 steel wool. Rub this steel wool in a circular motion around the affected area. Keep doing it until the patch buffs.

If either of these approaches works, you will have to consider using a marble cleaner. This cleaner comes in handy when dealing with hard water patches and soap scum stains. Apply the cleaner on the affected area and rub it using a soft piece of cloth.

  • Other Stubborn Stains

The process of removing stains from marble floors will often vary with the type. Usually, these stains could be oil-based, organic, or rust.

For instance, you will need a rust remover when handling rust patches. Ensure that the chosen solvent is non-acidic, as this will cushion the problem from worsening.

The standard procedure for removing the oil-based and organic stains will always be using marble poultice.

  • Once you make a perfect mixture of your poultice, apply it to the affected area in circular motions.
  • Repeat this until the stain disappears.

If it does not work, do not shy away from getting professional help.

 

How to Avoid Streaks on Marble Floors?

how to clean marble floor with baking soda

Everyone looks forward to cleaning their marble floors without leaving streaks. You are no exception. In most cases, you will need a pinch of alcohol and pH-neutral detergent to get the job done. Whether you are cleaning grout or grime, the effects and the process will be the same.

  • You will have to mix warm water with a few squirts of liquid pH-neutral detergents.
  • You will also need to add a cup of alcohol in this warm water.
  • Once you get a perfect solution, dip in it a soft piece of cloth or microfiber mop.
  • Wipe the floor with this damp towel or mop carefully yet thoroughly.
  • Rinse the surface with clean water, and you will be good to go.

 

What Not to Do When Cleaning Marble Floors?

how to take care of marble floors

Unlike what many people assume, marble floor cleaning is a straightforward process for those who understand what to do. The catch is to ensure that you do it regularly, as this leaves your surfaces sparkling.

But is that enough? No. Ensure that you understand the dos and don’ts of the process. Here are a few things you should avoid when cleaning marble floors.

1. Do not seal the floor from time to time

The harm caused by the regular sealing of marble floors is unimaginable. Some of these marbles do not require such sealing at all. For this reason, take the time to understand what your choice brings on the table.

Applying too much sealant on the floor means that your coat will be uneven. That is because these floors barely absorb excess adhesives, leaving you with an unpleasant surface.

2. Never leave the floor wet

You can hardly overlook the vulnerability that marble floors have to wetness. From patches and stains to low integrity, this is not something you will want on your surface. With their porous nature, they will absorb the water and leave you with a relatively dull appearance.

Take the time to wipe away any water on the surface. Preferably, use microfiber mops or soft towels during this time.

3. Do not rely on anti-scaling agents

Anti-scaling agents have proven to be behind dull marble floors. Using them will only translate to the damage of your surface in the long run. Remember, marble is relatively sensitive, and getting stains will happen within a short time.

4. Do not sit or even stand on marble countertops

There is no denying that marble floors are less flexible and robust. For this reason, leaning against them could lead to their breakage or even injuries on your body.

5. Don’t air-dry your marble floor

Any cleaner should never let the marble floor air-dry.

Marble absorbs water, and detergent remains, thus discoloring your floor. Once you are done moping your floor, use a clean, dry cloth to dry your surface.

This process of drying your floor with a cloth makes maple cleaning demanding and hard. Though the result is brilliant and helps you maintain your floor to the required standard.

 

What Is the Best Way to Polish Marble Floorings?

You polish your floor depending on the magnitude of grime that is affecting the surface. If it has a stain, you will have to remove them to leave the surface sparkling clean.

It is advisable to deal with stains or spills that get on your floor immediately. It happens because when stains sit on this floor for long, they become difficult to remove. Here is how to remove marble stains from your floor.

1. In this method, you will require water, baking soda. Plastic wrap, a small bowl, and a soft piece of cloth.

2. You start by combing water and baking soda in your small bowl to form a paste.

3. Apply the paste on the areas with stain and cover with the plastic wrap. Let the paste sit on the area for at least 24houyrs to give it time to absorb the stain.

4. Remove the plastic wrap and the paste. Dip the soft cloth in water and wipe off the paste residue. That way, your marble floor will be stain-free. You can use this solution in removing water stains from the marble floor, countertops, or sink.

 

How to Take Care of Your Marble Tile Floors?

how to clean marble floor in bathroom

Before any cleaning is done, ensure that regular maintenance and preventive measures adhere to daily. It’s is essential to take care of every spills and liquid that can stain your floor.

In this segment, we aspire to educate the user on the procedure required to maintain your marble floor in the long term.

1. Clean Spills

Any spills should be clean as it happens. These actions prevent your marble floor from absorbing standing water. As a result, it protects the floor from stubborn stains and discoloring. Use dumb clothe when cleaning off spills.

2. Use Mild Detergent

When buying a detergent, it is advisable to use a ph-neutral product. The products are normally gentle to your surfaces. The ph-neutral product cannot be compared to alkaline and acid products.

Though a product like vinegar are common with many home cleaners and are usable in cleaning several floors like tiles. With marble, never try it. This is because vinegar is acidic, and it has a high chance of destroying your floor.

You should also avoid these products; ammonia, citrus cleaners, and ceramic floor cleaner.

3. Avoid and Clean Marks

how to buff marble floor

Scuff marks are caused by drugging sneakers or furniture’s on the surface of your floor. As a result, they cause flaws that affect the beauty of your marble floor.

However, most of these marks are removable using mops, but those stubborn scuff marks use a felt pad.

During this process, apply a mild detergent and water to your felt pad, then use it to rub along the line caused.

4. Consider Marble Sealer

The use of a marble sealer helps to preserve your floor. Marble sealers are locally found at any improvement store or online platform.

5. Apply Baking Soda

If your marble floors get stubborn stains. Baking soda should be applied in small doses taking caution and care. Since it is a mild abrasive cleaner, much force is not needed.

The process of removing these stains is done by rubbing a soft cloth on the surface gently. The baking soda should not be left on the surface of your floor for long as it dulls the glossy finish.

6. Use Rugs and Carpets

Ensure that you place some mats on places where traffic is enormous to protect your surface from scuffs.

Putting a doormat on the entrance of your protect your surface from dust. Since marble becomes very during the winter season, carpets will help you keep warm

 

How to Protect Your Rest Room Marble Floor?

how to clean marble tile shower

Below are the methods you should consider taking to protect your marble floor:

  • Ensure that you avoid going with foreign substances such as foodstuff or drinks in the bathroom. You may end up spilling such substances on the marble floor.
  • Avoid entering with dirty flip-flops in the bathroom. It would be best if you designated some unique flip-flops to use when entering the bathroom.
  • Place a rug on the bathroom pathway to help clean your feet as you are entering the bathroom. This will help you to leave the dirty particles on the rug that you can dust off later.
  • Never procrastinate cleaning your bathroom. Do it whenever you see a stain on the floor. This will help by stopping any build-up of mold or soap scum on the marble.

 

FAQs

1. Can I Clean Marble Floors with Baking Soda?

Yes. You could add a few tablespoonfuls of baking soda to your warm, distilled water. Ensure that you mix it with pH-neutral detergent. Using a microfiber mop, wipe your floor.

2. Can I Clean My Marble Floors with Vinegar?

Cleaning marble floors with acidic solutions is a big no. Vinegar is no exception in this case. The use of vinegar will only make your surface much duller.

The appearance of stains will also be inescapable in some instances. For this reason, the best way out is to avoid the use of vinegar on marble floors. It will ensure that you enjoy not only sparkling but also longlasting marble floors in the long run.

 

Conclusion

As long as you understand how to clean marble floors, you will be confident of their enhanced longevity. Thankfully, the insights provided above are worth relying on in this mission.

Take each precaution, and religiously so. This way, you will be sure of the best results.