The microfiber mop is one of the best, most convenient and most reliable mops that you can use to clean every type of floor. From wet to dry mop, cleaning microparticles and all kinds of particles. And microfiber mop will be your best option to consider for these purposes.
However, for a microfiber mop to fit all-purpose cleaning and efficiently clean your home, it is significant to understand how to use it.
Besides, this article will elaborate on using microfiber for a diverse situations that other types of the map cannot deliver efficiently to your satisfaction. Below is a guide on how to use a microfiber mop.
How to Use a Microfiber Mop for Dry Dust Mopping?
Before you wet mop any surface, it is advisable to dry mop the cover for the best result. Hence, I recommend you use a microfiber mop for dry dust mopping.
Microfiber mop has a dry mop pad that you can fix on the head for dry dust mopping. The dry mop pad works in a unique way that you can use it to remove all sorts of particles by dry dust mopping.
The fibers of the dry mop pad create a static energy that makes it magnetic to trap micro-particles, pet hair, dust, and spills on the floor.
Besides that, the fibers are tiny enough to trap the dust and dirt, thereby leaving nothing behind to clean. But before you directly start swiveling the head of the mop on the floor. This is how you handle dry dust mopping with the microfiber mop:
Step 1: Place the dust mop on the floor and place the frame and handle onto the dry dust pad. When placing the frame, ensure it is centered directly on the pad. The pad should also overlap the edge by an inch in all dimensions.
Step 2: Start systemically mopping the floor with the same end of the mop while moving.
Step 3: While mopping, ensure you move forward by walking backward and working the mop side to side.
Step 4: Move the mop side to side by twisting the handle to turn the mop. The purpose of moving the mop side to side is to maintain the edge you started mopping with and prevent the dust, dirt, and other particles from falling back to the ground.
Step 5: After you are done with dry mopping, lift the mop and cautiously remove or separate the mop from the frame to remove dirt and other debris. This should be gently to avoid the trapped particles inside the mop from falling onto the surface.
Step 6: For efficient dust cleaning, remove the dry mop pad and use a damp, wet mop pad to pick up any debris left behind.
How Should You Use a Microfiber Mop for Wet Mopping?
After dry mopping, there are tough stains, pet messes, footprints, spills, sticky and mud on the floor that cannot be removed by simply dry mopping the surface.
For that purpose, it would be best to wet mop the surface to clean your floor, and the best solution is to employ a microfiber mop. Using microfiber for wet mopping is a simple task by just soaking in a little water and rinsing it.
You can use the damp mop with either mild or non-bleaching cleaning agents or without because the microfiber pad is designed to kill 99% of germs on the floor.
However, when wetting the pad, you should be careful enough. Soaking the pad with too little water will reduce its efficacy. Also, it would help if you did not wet it with too much water because the pad will be saturated. It makes the fibers not hold and pick dirt efficiently.
The best microfiber mop recommended you use for wet mopping is O cedar microfiber Flip mop and Mexerris Microfiber Floor Mop and Turbo Microfiber Mop Reviews
O cedar flip mob features an ultra-dense chenille mop head and double-sided microfiber pad, which helps deliver double-action cleaning power. Meaning you can flip the mop head for dry dust mopping and flip on the other side for wet mopping.
Guide on How to Wet Mop Using Microfiber Mop
Since you want to achieve the best result, like a polished surface after dust drying, mopping ensures you shake off all the dust and particles in the fiber to avoid messing with the floor. Then carry onwards with the tips below:
Step 1: Flipped the unused side of the pad of the O cedar flip mop and wet it with water either in the sink, under the faucet, or you can use the improved microfiber mop bucket.
Step 2: After wetting the pad, roll it up and wring it out by hand. However, you should not over-wring it or saturate it with excess water. Instead, wring it to make it damp enough.
Step 3: Start systemically mopping the floor with the same end of the mop while moving backward and working the mop side to side. The purpose of mopping backward is to avoid leaving your footprints and dirt behind. However, while wet mopping, use the instruction {number 4 and 5} on dust-dry mopping for flexibility and convenience.
Step 4: Whenever you feel that the mop is dirty and inconducive for wet mopping, soak and rinse the pad to make it clean and proceed to clean the floor.
Step 5: When finished with wet mopping, rinse and clean the O cedar dual action microfiber pad with warm water or washing machine on warm.
Step 6: Air-dry it or use a low dryer heat setting to dry the pad.
What to Do to Care for Your Microfiber Mop?
Now you know how to clean with a microfiber mop, but how would you care for the microfiber mop? Since microfiber mop is expensive, you should adopt a way to care for them to last longer and reduce the expenses of frequently replacing them. And for that purpose, you may use the following tips:
After mopping, remove the mop pad from the head and shake it off to remove the debris in the fibers.
If large debris or residues are left behind after cleaning, use a brush to remove them or break them up to washed out properly.
Soak and wash the microfiber mop warm with a mild detergent that can either be powder or a solution. Besides, you may also machine wash, but before tossing it into the washer.
Step 1: First, you need to soak it. While in the washer, the temperature should not be above 40-degrees Farenheight, and the speed setting should be regular/normal.
Step 2: Do not use fabric softener or microfiber cloth because they clog the pores of the mop pad, which interferes with its ability to trap micro particles and dust debris.
Step 3: Wash the pads separately and do not wash with cotton and non-synthetic materials or towels because they release many stray strands capable of clogging the fibers.
Step 4: For heavy soil that is stuck in the fiber high solvent detergent would be efficient for cleaning purposes.
Step 5: After rinsing or removing it from the washer, air dries the mop pads. If you intend to use the dryer to dry it, it would be significant to maintain the lowest temperature to avoid damaging the pad.
Step 6: Store it in a dry and clean cabinet in the kitchen, bathroom, or closet if you like. The reason for keeping it in a sterile cabinet is that microfiber pads generate static energy, which will make it trap any particles within the contact.
How to Clean Microfiber Mop Pad?
Follow the instructions below to clean the microfiber pad:
- Remove the microfiber pad from the head and shake it off to remove the dust and debris trapped in the fiber.
- If there are large debris sticking in the fiber, use a soft brush or an old comb to break them.
- Soak the pad in hot water before washing it. When washing, use mild detergent and wash it separately with your towels, cotton and non-synthetic fabrics.
- Before let under running water to remove all the dirt and debris, then thoroughly rinse it.
- Air dry on the clothing line and, if best, under the shade to make it last longer. If you intend to use a dryer, set it on low heat.
- Then store in a clean and dry place like the cabinet or tight bag.
- Click here to see more about how to clean a mop.
Conclusion
For a Microfiber mop to last longer, you must understand how to use, care for, and clean it. The best way to make it last longer is to employ the tips mentioned above in every section.
Besides, the significance of adhering to the instruction would save you the cost of frequently replacing the pads and also helps to deliver satisfying outcomes when moping. These cleaning and caring instructions are recommendable for either commercial or home microfiber pads.
