It can be so frustrating when you’re trying to vacuum and it feels like the vacuum is pushing back against you! So why is my vacuum so hard to push? There are a few possible reasons: the type of vacuum you have, how much dirt or debris is in the way, or if there’s something blocking the hose. In this blog post, we’ll explore each of these possibilities and offer some solutions. Keep reading to learn more!
6 Reasons Why Your Vacuum Is Hard to Push
You pull out the vacuum, plug it in, and start cleaning…only to find that the vacuum is really hard to push! What gives? Is it just a cheap vacuum, or is there something wrong with it? Let’s find out.
1. Type of vacuum:
Depending on what type of vacuum you have, it could be why your vacuum is so hard to push. Upright vacuums tend to be heavier than canister vacuums, making them more difficult to maneuver and push around. Consider switching to a lightweight canister model if pushing an upright is too hard.
2. Amount of dirt and debris:
Another factor contributing to why your vacuum is so hard to push could be the amount of dirt and debris that has accumulated on your floors or carpets. Vacuums are designed to suck up dirt, but if there’s too much in the way, it can make it harder for the vacuum to move. Regularly vacuuming and cleaning your carpets can help reduce the amount of dirt and debris, making it easier to push your vacuum.
3. Blocked hose:
If you have a bagged vacuum, the hose could be blocked by dirt or debris that has been sucked up into the bag. Cleaning out the bag regularly can help prevent this from happening and make it easier to push your vacuum around.
4. Wheels and bearings:
The wheels on your vacuum are important for helping it glide across floors easily, but if they’re not properly lubricated with oil or wax, they can start to stick or malfunction which will cause resistance when pushing your vacuum.
Make sure to check and clean your wheels regularly for best performance.
5. Lack of power:
If your vacuum isn’t powerful enough to pick up dirt and debris, it can be harder to push because the motor has to work harder to do its job. Make sure that your vacuum is plugged in properly and check for any clogs or blockages that could be limiting its suction power.
6. Filters:
Vacuum filters help keep dust and allergens from being released back into the air when you’re vacuuming, but if they get clogged with too much debris, they can hinder the vacuum’s ability to suck up dirt effectively.
Cleaning out your filter regularly will make it easier to push your vacuum around and also improve its performance overall.
Other Factors that Make Your Vacuum Hard to Push
In addition to the above factors, there may be other things that can make your vacuum hard to push such as worn out belts or hoses, clogged brushes, dirty wheels, or an unbalanced design. If you notice any of these issues, try cleaning and inspecting your vacuum for possible solutions.
You’re using the wrong height settings
A lot of people think that the higher the setting on their vacuum, the better it will clean their carpets. However, this is not always the case.
If the setting is too high, the vacuum will be hard to push and it will not pick up all of the dirt and debris from the carpet. The best way to vacuum a carpet is to use the lowest setting that will still pick up all of the dirt and debris.
This will make it easier to push the vacuum and ensures that you are getting a thorough cleaning.
You’re vacuuming a high pile carpet
When you’re vacuuming a high pile carpet, you may find that your vacuum is hard to push. This is because the high pile can obstruct the airflow, making it difficult for the vacuum to move. To avoid this problem, you can use a few simple tricks.
First, make sure that the vacuum’s brush roll is set to the appropriate height. If it’s too low, it will catch on the carpet and make it harder to push. Second, be sure to vacuum in the direction of the pile.
This will help the vacuum move more easily. Finally, take your time and go slowly. This way, you won’t have to exert as much force and your vacuum will be easier to push.
The suction is too high
Anybody who has ever vacuumed a carpet knows that it can be tough work. You have to push the heavy vacuum cleaner back and forth, and it can be easy to get tired.
However, if you find that your vacuum is hard to push, it may be due to the suction. The suction is what allows the vacuum to pick up dirt and debris, but if it’s set too high, it can make the vacuum hard to push. Fortunately, there’s an easy fix.
Most vacuums have a suction control lever that allows you to adjust the level of suction. By lowering the suction, you can make it easier to push the vacuum without sacrificing cleaning power.
So if you find yourself struggling to push your vacuum, just remember to check the suction control lever.
Conclusion
A vacuum that’s hard to push can be a real hassle. Fortunately, there are several factors that could be causing the issue and easy fixes for each one. Make sure to check your vacuum regularly for clogs, dust, or dirt buildup that could hinder its performance. Also, ensure that all of the parts of your vacuum are lubricated properly and functioning correctly. Finally, make sure that you’re using the right height setting and vacuuming in the direction of the pile when dealing with high pile carpets. By following these tips, you should have no trouble getting your vacuum cleaner running like new again!
