Menu Close

How Do You Vacuum an Above Ground Pool Manually?

If you have an above-ground pool, then at some point, you will need to vacuum it. But how do you vacuum an above ground pool manually? This can be a daunting task if you’ve never done it before, but don’t worry – we’re here to help!

This blog post will walk you through the steps of manually vacuuming an above-ground pool. Vacuuming your pool is important to keep it clean and algae-free, so don’t skip this step!

Before Starting Vacuuming, Make Everything Set First

Before you start the job, you should prepare these:

  • Pool Vacuum
  • Hose
  • Adapter
  • Pole
  • Net
  • Filter Cartridge

Give detailed step-by-step guide to explain how to use the things above to vacuum the pool

What should you do before vacuuming the pool?

how do you vacuum an above ground pool

Don’t rush to vacuum your poo, there are a few things you need to do beforehand in order to make the process go as smoothly as possible.

Before you start vacuuming, you need to:

– Test and adjust your water chemistry. This is important because you don’t want to vacuum up dirty water and then put it back into your pool. Test your pool water’s pH, alkalinity, and calcium hardness levels and adjust as needed.

– Make sure the pool is free of debris. This means removing any leaves, twigs, or other objects that might get caught in the vacuum head or hose.

– Backwash your filter. This will help remove any dirt or debris that might be clogging it up and you should also backwash your filter after vacuuming to get rid of any dirt or debris that the vacuum might have collected.

– Clean the pump strainer basket of any debris. This will ensure that the pump is able to work properly and doesn’t get clogged. What you should do is , locate the basket and remove it. Then, take out any debris that might be inside of it. Doing this before and after you vacuum is good to keep the pump working properly.

– Backwash the filter as needed. This step is important because it clears out the filter so that it can do its job properly.

How Do You Vacuum Your Above Ground Pool Manually?

Now that you’ve prepared your pool for vacuuming, it’s time to get to work! Here are the steps you need to take:

Step 1. Attach the hose to the adapter and insert it into the pool.

You should also make sure that the hose is securely attached to the vacuum head. If you’re having trouble attaching the hose, refer to the manufacturer’s instructions for your specific model of pool.

Once the hose is attached, insert it into the water and turn on the pump. The vacuum should start working and you should see suction at the

Step 2. Put on the vacuum head and attach the net.

You must ensure that the vacuum head is securely attached to the pole. And then, you should also attach the net to the vacuum head.

The net is important because it will catch any dirt or debris that the vacuum head picks up.

Step 3. Connect the other end of the hose to the pole.

Remember to make sure that the hose is securely attached to the pole.

Step 4. Raise the pole and place the vacuum head in the pool.

You must ensure that the vacuum head is completely submerged in the water. If it’s not, the vacuum won’t work properly.

Step 5. Push and hold down the lever on the vacuum head to start vacuuming.

Step 6. Move the vacuum head around the pool, getting all the corners and edges.

Now, you’re ready to start vacuuming! Slowly move the vacuum head around the pool, making sure to cover all of the surfaces. The vacuum will do most of the work for you, but you may need to use your pole to help guide it around tight corners or edges.

As you vacuum, the dirty water will be sucked into the hose and then into the filter. Keep an eye on the filter pressure gauge to make sure that it’s not getting too high. If it starts to get too high, backwash the filter to relieve some of the pressure.

Step 7. When you’re finished, release the lever on the vacuum head and remove it from the pool.

By doing this , you will stop the suction and the vacuum will turn off.

Next, disconnect the hose from the pole and then from the vacuum head. Finally, remove the net from the vacuum head and empty it out.

You’ve now successfully vacuumed your pool! Just remember to backwash your filter to remove any dirt or debris that might have been collected during the vacuuming process. And that’s it!

Tips on Using Automatic Pool Cleaner for the Pool?

Automatic pool cleaners are a great way to keep your above-ground pool clean with minimal effort on your part. But there are some tips on using automatic pool cleaner for the above ground pool.

First, make sure that the cleaner is compatible with the size and shape of your pool.

Second, take the time to read the instructions carefully so that you know how to operate the cleaner properly.

And finally, be patient! It may take a few tries to get the hang of using an automatic pool cleaner, but once you do, you’ll be glad you have it.

Warning to Keep in Mind

There are a few things to keep in mind when you’re vacuuming the pool.

First, make sure you have the right equipment. You’ll need a vacuum hose that’s long enough to reach the bottom of the pool, and a vacuum head that’s designed for above-ground pools.

Second, take your time. It’s important to move slowly so you can pick up all the dirt and debris. And finally, be careful! Remember that there’s lots of water around, and you don’t want to accidentally slip and fall.

With these tips in mind, you’re ready to tackle the task of vacuuming the pool. Just remember to take your time, be careful, and you’ll be swimming in no time!


By following these steps, you can easily use an automatic pool cleaner to clean your above ground pool. Just be sure to turn off the pump and remove the cleaner when it’s finished so that it doesn’t damage your pool.

Rate this post