If you have a Shark Navigator vacuum cleaner, then you know how important it is to keep the brush roll clean.
If not cleaned regularly, the brush roll can become clogged with dirt and debris, which will affect the performance of your vacuum cleaner.
So, how to clean shark navigator brush roll?
In this blog post, we will show you how to remove and clean the Shark Navigator brush roll quickly and easily!
Why Should You Clean Your Shark Vacuum Brush?
Keeping your Shark vacuum brush clean is important because it helps maintain its suction power.
When dirt and debris accumulate in the brush, they can block the airways and prevent air from flowing freely through the vacuum.
This reduces suction power and makes it harder for your vacuum to pick up dirt. Plus, you don’t want all that dust and grime circulating back into your living space!
Regularly cleaning your shark vacuum brush ensures that all of these issues are kept at bay, allowing you to get maximum performance from your vacuum cleaner.
How to Remove and Clean Your Shark Navigator Brush Roll?
The good news is, unlike earlier models of the Shark Navigator and Rotator vacuums, removing this component typically doesn’t require unscrewing anything with a screwdriver. These more modern and user-friendly designs have a quick-release button on the bottom of their cleaning head that easily lets you take out the brush roll if necessary.
Steps to remove the brush
Step 1: To start, make sure you turn off and unplug the machine before beginning. There are two buttons on the nozzle that need to be pressed down in order to open up the compartment of the brush roll.
Step 2: Once opened, use the included hair removal tool with the onboard storage to cut away any debris or excess strings around the brush roll.
Step 3: After removing these tangles, cleanse and rinse off your brush roll until it has completely dried out.
Step 4:To reinstall it, press down on the lid of the compartment until you hear a click – this will let you know that it’s been securely put back into position.
Notes on cleaning shark vacuum rollers
1. Start by removing any visible dirt and pet hair with your fingers or tweezers/pliers if needed.
2. Once you’re done with that, use an old toothbrush (or other small bristled brush) with soap and water to scrub away at any remaining dirt.
3. Be sure to dry off your brush roller before putting it back in place again.
4. For more stubborn messes,you may want to consider using spray lubricants or degreasers after using soap and water as these products can help break down tougher grime on your roller brush without damaging it.
5. make sure not to overdo it – too much lubricant or degreaser could cause problems in your machine’s operation later on down the line.
Shark’s commitment to excellence ensures that their vacuums are able to perform efficiently when kept in good condition. Replacing the main brush roll and the soft roller regularly is necessary if you want your vacuum to clean at its best.
Each of these components can be easily found from any of Shark’s authorized stores, guaranteed to be genuine and trustworthy replacements for a thorough cleaning job.
Replacing your vacuum’s components should not be difficult; don’t hesitate to get yourself a quality replacement if you find that it isn’t picking up debris as well as it used to.
You get quality components that will help keep your vacuum lasting longer – do yourself and your vacuum a favor by replacing those tired brush rolls today.
How Often Should I Clean the Roller Brush on My Vacuum?
You should clean the roller brush on your vacuum at least once a month.
This will help ensure maximum performance and efficiency from your vacuum cleaner.
Additionally, if you have pets or allergies, it’s best to deep-clean more frequently.
When Should Replace the Whole Vacuum？
After several months of repeated use, you may find that your vacuum isn’t running as well as it once did. At this point, it might be time to consider replacing the entire unit with a new one.
It’s important to remember that regular maintenance can help extend the life of your vacuum cleaner.
Make sure to clean out the dust bin and replace the filter regularly to keep your vacuum running optimally.
Conclusion
By following these cleaning and maintenance tips, you can ensure that your Shark Navigator brush roll lasts as long as possible. With a little bit of care and attention, you can get the most out of your vacuum cleaner for years to come.
