If you’ve been using an O-Cedar mop for your home cleaning, you know how easy it is to get a streak-free finish. Do you have an O Cedar mop head that’s seen better days?
Are you looking for a way to remove it without damaging the mop handle or the floor?
But what if you need to remove the mop head? Don’t worry! It’s not as difficult as it may seem. Here’s a step-by-step guide on how to quickly and easily remove your O-Cedar mop head.
In this blog post, we will show you how to easily remove the O Cedar mop head using just a few simple tools. Stay tuned, and we’ll get started!
Is The O-Cedar Mop Head Removable?
Yes, the O Cedar mop head is removable. To do this, you will need a few standard tools such as a flathead screwdriver and pliers.
How to Take Off O’cedar Mop Head?
Follow these steps:
Step 1: Unscrew the Handle Connector
The first step in removing the mop head is to unscrew the handle connector. This is usually located at the top of the handle, but it depends on which model of O-Cedar mop you have.
Unscrew it until you feel it has come loose enough to lift up the handle from the base of the mop head.
Step 2: Pull Up on The Plastic Ring
Once you have unscrewed the handle connector, locate the plastic ring at the bottom of the mop head. Grip this plastic ring firmly with one hand and pull upwards gently with your other hand until it comes off completely.
You may need to use some force, but be sure not to pull too hard or you could damage your mop head or handle connector.
Step 3: Remove The Mop Head
Finally, once you have removed the plastic ring, use both hands to carefully pull up on either side of the mop head until it comes off completely.
This should be relatively easy if your handle connector was properly unscrewed beforehand. Once removed, discard or store away your old mop head and prepare for installation of a new one!
How to You Replace the O’cedar Mop Head?
Replacing your O-Cedar spin mop head is a straightforward process. All you need to do is line up the black frame with the red frame and press down firmly, yet gently. The frames will lock together, so there’s no need to use excessive force.
With some care and attention, you can have a new mop head quickly and easily. Keep in mind that it’s always a good idea to take care of your mop, because a well-maintained product will last much longer than one that goes neglected!
Here are Videos that Helps You Do It Easily
- Find your O’ceder mop type and follow the videos:
With just a few simple steps, removing an old O-Cedar mop head can be done quickly and easily! remember to start by unscrewing your handle connector before attempting to pull off the plastic ring and finally remove your old mop head from its base. Keeping these steps in mind will help ensure that you don’t damage any part of your O-Cedar mopping system while changing out an old mop head for a fresh one!